Vactrols shipping, please check your shipping info!

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!
Post Reply
User avatar
samuraipizzacat29
adadadadadadadsr
Posts: 1064
Joined: Mon Jun 27, 2011 3:04 pm
Location: Lehigh Valley, PA, USA

Vactrols shipping, please check your shipping info!

Post by samuraipizzacat29 »

The vactrols have been ordered, thanks for all your support guys! there's still about 200 vtl5c3/2 remaining if you'd like to upgrade.

Soooooo I got the final quote for 5C3 and 5C3/2 vactrols. They cost $3.41 and $4.39 respectively. Judging by the experience of the last run, the following seems like it'll cover my costs and still be fair:


VTL5C3
10 @ $3.95 each
20 @ $3.85 ea
30+ @ $3.75 ea

VTL5C3/2
10 @ $4.95 ea
20 @ $4.85 ea
30+ @ $4.75 ea

If you're going to get at least 10 5c3 and 10 5c3/2, you can bump yourself into the next bracket. I.e.: if you get 10 of each, you would charge yourself $38.50 and $48.50 respectively +shipping. Same goes with 20 of each ($75 + $95 = 170). If you want more than that of each, pm me for a quote so I can make sure I don't hose you / make more than I need to cover the transaction.

Shipping : add $2 for USA shipping and $4 for international shipping

please, please, PLEASE contact me if you need less than 10 vactrols! It's nice to get a heads up. It's not my goal to profit here, so margins are super tight. [/b]

So, if you're interested please follow these rules:
1) send an email with "Vactrol Order" in the subject line to "nate" "at" "paperproductsmusic.com" that states the quantity of each vactrol you request. Please make sure to include your proper shipping address and what email your paypal payment will come from if it's different. This is so that I can keep track of everything.

2) send the total via paypal according to the instructions above to the email address above.

3) wait patiently for the 6 weeks or so of factory lead time to pass, and I will fill orders in the order they were received.

If you have any questions, please pm me and I'll get to you as soon as I can. Please keep in mind I'll likely be receiving about 200 emails, so it'll be difficult to keep everything straight.

thanks again and glad I could be of service to y'all!

ps: I'm going to try my hardest to send a pm to everyone that expressed interest, but don't hang me if I forget or overlook you. It's not on purpose.[/b]

Thanks,
Nate

oh!!!!! very importantly this order taking will be open for 3 weeks no more, no less. the quote I received is guaranteed for 30 days, so we can't stretch it out any longer than that.

please see the checklist below if you've placed an order to make sure the quantities I have you down for are correct. pm me if you have any questions or problems and i'll get back to you as soon as I can.
Attachments
vactrols redux.pdf
(55.93 KiB) Downloaded 111 times
Last edited by samuraipizzacat29 on Sun Aug 12, 2012 6:08 pm, edited 8 times in total.
"You can't rule the world by going at it all scattershot." - Pearl Forrester, "The Final Sacrifice"
Top
wmonk
Common Wiggler
Posts: 241
Joined: Thu Jun 03, 2010 1:01 pm
Location: Utrecht, The Netherlands

Post by wmonk »

20 of each it will be!

Thanks for doing this!
My Website: kits in Europe
My Weblog
Top
mckenic

Post by mckenic »

BRILLIANT!

Thanks a MILLION for doing this! :hug: I'll certainly be down for 10 of each + int. shipping and will send that email after the weelend! Need to check the difference between C3/2 & 5C3 and what is needed for Mathias' upcoming PCB :hihi:

VERY much appreciated Nate! Thank you!
Dave
Last edited by mckenic on Fri May 18, 2012 3:34 pm, edited 1 time in total.
Top
mckenic

Post by mckenic »

-Double-
Top
User avatar
regenbot
Super Deluxe Wiggler
Posts: 1179
Joined: Sat Aug 21, 2010 5:59 am
Location: Finland

Post by regenbot »

payment sent for 10 VTLC3/2's

Cheers, Heikki
Top
User avatar
negativspace
Manhattan Analog
Posts: 6603
Joined: Tue Apr 13, 2010 2:50 am
Location: Manhattan, KS, USA
Contact:
Contact negativspace

Post by negativspace »

mckenic wrote:Need to check the difference between C3/2 & 5C3 and what is needed for Mathias' upcoming PCB :hihi:
The PS-3100 PCB takes 3x VTL5C3/2.
Top
User avatar
metasonix
Tube Pioneer
Posts: 5465
Joined: Fri Aug 03, 2007 2:35 pm

Post by metasonix »

I still want 200 of the 5C3/2.
Top
User avatar
Thonk Support
aka Monobass
Posts: 8930
Joined: Fri May 29, 2009 5:39 pm
Location: Brighton, UK

Post by Thonk Support »

I realised I didn't buy enough last time :doh:

I'll take 5 please.
Thonk - CLICK HERE - Modular Synth DIY + Eurorack Accessories Store

AS of October 2020 this account which used to go by the name of Monobass is now manned by various staff at Thonk.
Top
User avatar
L-1
Super Deluxe Wiggler
Posts: 2235
Joined: Wed Dec 14, 2011 8:20 am
Location: Belarus
Contact:
Contact L-1

Post by L-1 »

Payment sent for 10+20
Top
User avatar
consumed
International Filter Conspiracy
Posts: 3797
Joined: Fri May 25, 2007 1:38 pm
Location: nor cal

Post by consumed »

ordered and paid for 10 5c3/2
thanks for this!
Top
User avatar
LektroiD
Super Deluxe Wiggler
Posts: 1406
Joined: Tue Oct 20, 2009 1:55 am
Location: Scotland

Post by LektroiD »

I'd like 5x C3/2's (my budget is too low to afford any more just now).
Top
mckenic

Post by mckenic »

negativspace wrote:
mckenic wrote:Need to check the difference between C3/2 & 5C3 and what is needed for Mathias' upcoming PCB :hihi:
The PS-3100 PCB takes 3x VTL5C3/2.
Many thanks for this :tu: Much appreciated!
Top
User avatar
en.
Wiggling with Experience
Posts: 388
Joined: Sun Apr 25, 2010 8:47 am

Post by en. »

consumed wrote:ordered and paid for 10 5c3/2
thanks for this!
+1

:tu:
Top
User avatar
valis
aliens killed bigfoot
Posts: 2132
Joined: Tue Sep 30, 2008 3:53 pm
Location: on the palouse, usa

Post by valis »

Nice job :tu:

I'll have to get my finances in order and see what I can do.
Top
User avatar
asterisk
Super Deluxe Wiggler
Posts: 1221
Joined: Sat Jun 19, 2010 11:37 am
Location: Burlington VT

Post by asterisk »

just sent payment for 10 VTL5C3/2 vactrols.

thanks again nate!
Top
User avatar
samuraipizzacat29
adadadadadadadsr
Posts: 1064
Joined: Mon Jun 27, 2011 3:04 pm
Location: Lehigh Valley, PA, USA

Post by samuraipizzacat29 »

Thanks guys. I'm just glad everyone can get what they need :)
"You can't rule the world by going at it all scattershot." - Pearl Forrester, "The Final Sacrifice"
Top
User avatar
rowman
birds are dinosaurs
Posts: 556
Joined: Wed Jan 18, 2012 8:05 pm
Location: Melbourne

Post by rowman »

Did you just want the message that goes with the paypal transfer or a seperate email?
Top
User avatar
norbwuertz
Common Wiggler
Posts: 126
Joined: Tue Aug 09, 2011 10:50 am
Location: EURO-ZONE

Post by norbwuertz »

Hi Nate,

just sent payment for 10 VTL5C3 and 2 VTL5C3/2.

Thanks for doing this! :tu:
Top
User avatar
Reptil
In space no one can hear you wiggle
Posts: 1500
Joined: Tue Dec 30, 2008 4:39 pm
Location: low orbit

Post by Reptil »

payment sent for 10 of each
thank you!
:party:
Top
User avatar
samuraipizzacat29
adadadadadadadsr
Posts: 1064
Joined: Mon Jun 27, 2011 3:04 pm
Location: Lehigh Valley, PA, USA

Post by samuraipizzacat29 »

rowman wrote:Did you just want the message that goes with the paypal transfer or a seperate email?
It doesn't matter what order you do anything in, it's just for my records. I'm putting everyone's info into a separate excel sheet so as long as the information is there, I don't care how you do it. Just not in the thread please :)
"You can't rule the world by going at it all scattershot." - Pearl Forrester, "The Final Sacrifice"
Top
User avatar
theabsent
?
Posts: 1452
Joined: Wed Aug 13, 2008 9:15 am
Location: Finland

Post by theabsent »

Still in for 20. Will pay during the weekend.
My releases: https://laitoshuoltaja.bandcamp.com/releases
My sound art & live gigs: https://www.facebook.com/Laitoshuoltaja/
Modular live gigs (our modular band): https://konekonekone.bandcamp.com/releases
Modular Patch of The Week Channel on YouTube: https://www.youtube.com/channel/UCTYqCy ... pvEmilJScg
Top
User avatar
Emalot
Wiggling with Experience
Posts: 371
Joined: Sat May 07, 2011 5:52 am
Location: Lyon---France

Post by Emalot »

i send an Email for 5 of each. THX
Top
User avatar
KNYST
hiding in the forest
Posts: 2951
Joined: Mon Jan 26, 2009 10:09 am
Location: the Taiga, Sweden
Contact:
Contact KNYST

Post by KNYST »

VTL5C3 x15, and VTL5C3/2 x15

email sent + payment sent.

Please read my Paypal message. Thanks!! :tu:
NOISE HEALS.
patch responsibly.
LISTEN | WATCH
Top
User avatar
Rod Serling Fan Club
aquatic hitchhiker
Posts: 3759
Joined: Mon Dec 14, 2009 12:13 am
Location: MNTN

Post by Rod Serling Fan Club »

Paid for 10x VTL5C3/2
thanks!
Top
User avatar
samuraipizzacat29
adadadadadadadsr
Posts: 1064
Joined: Mon Jun 27, 2011 3:04 pm
Location: Lehigh Valley, PA, USA

Post by samuraipizzacat29 »

I've been asked: I can not mark the product as a gift because it is not. I will mark it the actual cash value of what I paid. I appreciate that it saves against unreasonable import taxes, but I can not afford to take responsibility for the misrepresentation.

Thank you and sorry for the inconvenience.
nate

PS: I've got a load more inquiries and payments so thanks! will post a list of everyone I've received from in a day or two.

Thanks!
"You can't rule the world by going at it all scattershot." - Pearl Forrester, "The Final Sacrifice"
Top
Post Reply

Return to “Music Tech DIY”