Shotgun module

kindredlost · Post by **kindredlost** » Sat Apr 09, 2011 9:32 pm

AKA swiss cheese module.

Sometimes referred to as the Bugsy Malone module.

This is a panel I've been using for various DIY projects. It is filling the last 132nd space left in my modular until Bryan Benting finishes the TSS-1 run.

The latest module this panel was used for was the Oakley Deep Equinoxe phase shifter. I made a crummy looking panel today with the milling machine at work. A video will be posted later of the milling fun.

The final panel will be from Ben Marshall at Big Blue Wave. That will actually look great. Here is an FPE preview of what it is supposed to look like. I moved the LED to the center of the jacks and added a switch for inverting the LFO output.

JohnLRice · Post by **JohnLRice** » Sat Apr 09, 2011 9:48 pm

Nice!

doctorvague · Post by **doctorvague** » Sat Apr 09, 2011 11:44 pm

Another holesome muffwiggler thread!

rezzn8r · Post by **rezzn8r** » Sun Apr 10, 2011 8:23 am

yeah, it does remind me of a roadside sign riddled with buck shot.

doctorvague · Post by **doctorvague** » Sun Apr 10, 2011 8:29 am

The bigger question here is what the heck will you do when your modular is completely filled up, David?? That's one of those bittersweet moments when you screw that last one in, isn't it.

Bryan B · Post by **Bryan B** » Sun Apr 10, 2011 9:34 am

I think the shotgun module would make great blanks! It just needs the cracks printed on to really pull it off.

I am honored that my module will complete your synth (for now?).

7thDanSound · Post by **7thDanSound** » Sun Apr 10, 2011 11:22 am

I'm still just trying to get my head around 132 spaces!

synthnut · Post by **synthnut** » Sun Apr 10, 2011 5:11 pm

Now, if the holes were really made with a shotgun....!

Good news David, the metal is finally here and I've done a quick test which came out even better than the previous metal!
Been caught up in burning dozens of screen stencils lately so I'm really looking forward to some proper etching fun one again...
Your new panel will be a reality soon I promise ;-)

Cheers,
Ben

decaying.sine · Post by **decaying.sine** » Sun Apr 10, 2011 5:24 pm

Could only be improved with finger nail scratches and a little blood splatter on it.

kindredlost · Post by **kindredlost** » Mon Apr 11, 2011 9:31 pm

Here is the video of the Oakley Deep Equinoxe panel I engraved.

I think there is a thread in the DIY section about a drill press recommendation. This might be overkill - I dunno.

[video][/video]

cornutt · Post by **cornutt** » Mon Apr 11, 2011 10:58 pm

Silly me. And I thought this was going to be a module with a shotgun in it! Could be useful for when the bass player tries to set his beer down on top of your modular.

whitewulfe · Post by **whitewulfe** » Tue Apr 12, 2011 12:41 am

cornutt wrote:Silly me. And I thought this was going to be a module with a shotgun in it! Could be useful for when the bass player tries to set his beer down on top of your modular.

But then, one must ask... How do you use CV to not only trigger/fire the shotgun, modular, but also to reload?

krisp14u · Post by **krisp14u** » Tue Apr 12, 2011 6:45 am

kindredlost wrote:Here is the video of the Oakley Deep Equinoxe panel I engraved.

I think there is a thread in the DIY section about a drill press recommendation. This might be overkill - I dunno.

[video][/video]

That may well be overkill but the problems IÃ¢â‚¬â„¢m having with panel makers at the moment I could sure use one

doctorvague · Post by **doctorvague** » Tue Apr 12, 2011 7:41 am

Cool vid!!

MOD WIGGLER

MOD WIGGLER

Shotgun module

Shotgun module