"Mini" resistors?

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, Synthbuilder

Post Reply
User avatar
oozitron
solder fume huffer
Posts: 861
Joined: Fri Jan 23, 2009 6:11 pm
Location: in a beautiful place out in the country

"Mini" resistors?

Post by oozitron »

Are there any drawbacks or issues with these "mini" resistors?

https://www.digikey.com/en/products/det ... K0/9770246

They are much less expensive... basic specs look the same as the normal sized metal film resistors.

Andrew
Never want to come down, never want to put my feet back down on the ground
User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3309
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Re: "Mini" resistors?

Post by Synthbuilder »

oozitron wrote: Sat Nov 28, 2020 8:41 amAre there any drawbacks or issues with these "mini" resistors?
They should work just fine. The smaller size does lead to increased self heating when current is passed which increases drift. However, this is likely to be insignificant in any of my circuits.

It's usually worth buying resistors in 100s as this greatly reduces costs. From Mouser the standard resistor I use is less than 2c a piece when bought in 100s, eg. 603-MFR-25FTE52-82K .

Tony
Post Reply

Return to “Oakley Sound Systems”