☢☢CUSTOM ACID BATH ETCHED EURO PANELS - FINALLY UP!!!☢☢

iirussell · Post by **iirussell** » Fri Aug 19, 2016 5:50 pm

These looks excellent. well done

neil_kerr · Post by **neil_kerr** » Fri Aug 19, 2016 6:01 pm

The new Han Solo DL-44 Blaster aluminium blind panels are now up for sale.

18HP in size, I have two for sale at the following link:

http://shop.aarckandaawe.com/product/ha ... lind-panel

Thanks for the support,
neil

neil_kerr · Post by **neil_kerr** » Fri Aug 19, 2016 6:05 pm

iirussell wrote:These looks excellent. well done

Thank you, relieved that they're finally up, was worried for a bit that I might have to pack it in and give up the ghost with the project.

neil_kerr · Post by **neil_kerr** » Sun Aug 21, 2016 7:29 pm

All panels going out in the post tomorrow.

Thanks to those who have bought so far, astronaut panels #1 sold out within 24 hours

Jalopy · Post by **Jalopy** » Sun Aug 21, 2016 8:55 pm

bobbcorr wrote:I missed out and I am sad.

same

neil_kerr · Post by **neil_kerr** » Mon Aug 22, 2016 4:42 am

Jalopy wrote:
bobbcorr wrote:I missed out and I am sad.

same

I have a few of the black astronaut panels as seen in the first post of this thread that I will try to get finished off and up within the next few days and will give you both a shout prior to sticking them online.

neil_kerr · Post by **neil_kerr** » Wed Aug 24, 2016 6:27 pm

Finished off the 'Orbit' 10 HP panels today and they're now up for sale on the site.

Have just 5 of these panels at the minute.

Thanks for looking and for the support

http://shop.aarckandaawe.com/product/or ... lind-panel

nickbaba · Post by **nickbaba** » Thu Aug 25, 2016 5:33 am

OK - I'm in (again!)

Don't know if it was just me, but Paypal link wasn't working last night...?

Stunning work, Neil.

neil_kerr · Post by **neil_kerr** » Thu Aug 25, 2016 12:55 pm

Cheers mate. Should have been working a few people bought ok last night. Did you get sorted?

nickbaba · Post by **nickbaba** » Thu Aug 25, 2016 1:03 pm

Yes ta I just went the other route... I think it was a PP issue, not your site...

Jalopy · Post by **Jalopy** » Fri Aug 26, 2016 12:05 am

nickbaba wrote:OK - I'm in (again!)

Don't know if it was just me, but Paypal link wasn't working last night...?

Stunning work, Neil.

I also had a problem as it gave me an error regarding shipping address but I could not change it on the paypal screen... whatever. Used my card direct - though I didn't want to.

neil_kerr · Post by **neil_kerr** » Fri Aug 26, 2016 9:10 am

Sorry about that, I am not sure what that was about, will look into it.

Putting up a few black 8HP astronauts this weekend. You both want me to ship your modules today or hold off until you see the black astronauts? Not trying to pull another sale out of yis, just that a few people bought one panel then days later bought and paid for another different panel and consequently more shipping.

Thanks for the support guys!

neil_kerr · Post by **neil_kerr** » Fri Aug 26, 2016 10:04 am

Seems to be working now as an order just came through. Don't know what happened but seems to have been an issue with PP and not the site. Apologies.

Jalopy · Post by **Jalopy** » Sat Aug 27, 2016 12:27 pm

Black astronauts aren't showing up for me yet when I look... Though I'm interested I'm inclined to just say send that orbitals when you can - I don't have enough space for 18 in blinds right now anyway.

Thanks

neil_kerr · Post by **neil_kerr** » Sun Aug 28, 2016 6:13 am

Sorry, had to finish them off, they are now up on the site. Tomorrow is a bank holiday so I will get the next batch of panels sent on Tuesday.

The Orbit panels have sold out for the time being, will hopefully make a few more in a couple of weeks.

As for the Black Astronaut panels, they have turned out really well and I am so pleased with them. They cost £4 more than the original grey panels as the process of colouring the panels and then getting them nice and shiney again, is messy and quite time consuming.

You can buy the panels are the following link:

http://shop.aarckandaawe.com/product/bl ... lind-panel

Robscorch · Post by **Robscorch** » Sun Aug 28, 2016 7:07 am

These are beautiful.

phosfiend · Post by **phosfiend** » Sun Aug 28, 2016 8:09 am

Love be your style, looks great

neil_kerr · Post by **neil_kerr** » Mon Aug 29, 2016 7:47 am

Cheers guys, fired a couple of free panels to Blawan last night at a Belfast gig, hopefully they'll end up in his modular. So far they've sold to UK, USA, Germany, Sweden, Canada, Spain, France....love the thought of these in systems all over the world, proud daddy.

neil_kerr · Post by **neil_kerr** » Sun Sep 04, 2016 8:45 am

So, managed to end up horribly ill after the Blawan gig and have spent all week in bed. Apologies for the slight delay in getting out the latest batch of panels.

Have a few panels which I'm not 100% happy with so i am going to offer them occasionally for sale here for a reduced price.

First up is one of the sold out Orbits panels which I cut a tiny bit too much and so it is a little narrower than the other panels. We're talking millimeters but I don't want to seel anything I am not fully happy with for the full price. So the first person to PM here gets the panel below for £15 plus £5 worldwide postage, £2 for UK postage.

You can see more pics of the Orbits panels here:

http://shop.aarckandaawe.com/product/or ... lind-panel

Thanks

MOD WIGGLER

MOD WIGGLER

☢☢CUSTOM ACID BATH ETCHED EURO PANELS - FINALLY UP!!!☢☢