"Mutable" PCB's, delight in the selection

DJBRUTAL · Post by **DJBRUTAL** » Sat Mar 07, 2015 4:16 am

In for:

1x Clouds (also posted in Clouds thread)
1x Braids
1x Elements
1x Ambika Mobo

edit: add 1x Frames

Thanks!

Comboy · Post by **Comboy** » Sat Mar 07, 2015 4:25 am

elements (1)
Tides (2)
Ripples (1)
Streams (1)
clouds (1) (added +1 in other thread)
Frames (1)

Thanks

szabomate · Post by **szabomate** » Sat Mar 07, 2015 4:52 am

1x elements
1x ripples
1x streams
1x braids

... please : )

bennelong.bicyclist · Post by **bennelong.bicyclist** » Sat Mar 07, 2015 8:23 am

windspirit wrote:Im considering an Ambika mobo, Im working on an open-source acrylic techno rig so it would probably be incomplete without one.

Over the course of writing this post I have decided to get one - put me down for an ambika. I am going to look into the voice cards and see what looks good there.

André Laska at TubeOhm in Germany sells Ambika motherboard and voice card PCBs, as well as compete kits, with full build documentation and email support. André's stuff is super high quality, highly recommended. See http://www.tubeohm.com/TubeOhm/INTRO_HARDWARE.html

timpecter · Post by **timpecter** » Sat Mar 07, 2015 9:13 am

bennelong.bicyclist wrote:André Laska at TubeOhm in Germany sells Ambika motherboard and voice card PCBs, as well as compete kits, with full build documentation and email support. André's stuff is super high quality, highly recommended. See http://www.tubeohm.com/TubeOhm/INTRO_HARDWARE.html

True. But with respect to TubeOhm, his Ambika mobo still isn't available, and has been pushed back a couple times, and it looks like it's gonna cost 60 EUR!

spunkytoofers · Post by **spunkytoofers** » Sat Mar 07, 2015 10:02 am

One for the shruthi digital Fx filter board !

mckenic · Post by **mckenic** » Sat Mar 07, 2015 10:05 am

Umm...

I have a few other SMD projects I FINALLY want to get off my ass and do (and I think they will be a little easier than these) so here is hoping my chops will be good enough after those!

Thankfully I have a M.I. factory Clouds on order so could I please get in on:

1 x Streams
1 x Frames

Many thanks for doing this and as always, Olivier is a STAR!

dadacore · Post by **dadacore** » Sat Mar 07, 2015 10:39 am

@adam
regarding the payment still don't get if I have to wait for you to pm with the amount including shipping and a paypal address, or if I'm supposed to calculate it by my own..

Morbid · Post by **Morbid** » Sat Mar 07, 2015 11:28 am

So awesome

.

1x elements
2x braids
1x Module Tester

ThecureForSin · Post by **ThecureForSin** » Sat Mar 07, 2015 11:51 am

One of each:

Braids
Clouds (other thread)
Elements
Ripples
Tides
Streams
Frames

casiotone1331 · Post by **casiotone1331** » Sat Mar 07, 2015 12:02 pm

Braids x1
Clouds x1
Tides x1
Frames x1

Super excited!

adam · Post by **adam** » Sat Mar 07, 2015 1:09 pm

timpecter wrote:
bennelong.bicyclist wrote:André Laska at TubeOhm in Germany sells Ambika motherboard and voice card PCBs, as well as compete kits, with full build documentation and email support. André's stuff is super high quality, highly recommended. See http://www.tubeohm.com/TubeOhm/INTRO_HARDWARE.html
True. But with respect to TubeOhm, his Ambika mobo still isn't available, and has been pushed back a couple times, and it looks like it's gonna cost 60 EUR!

to be fair, 60 eur sounds like a reasonable markup - i'm doing these at group buy rates

adam · Post by **adam** » Sat Mar 07, 2015 1:14 pm

sorry - only just seen this, have added you

adam · Post by **adam** » Sat Mar 07, 2015 1:20 pm

updating thread & pm's now
i had question about how much these builds would cost - i haven't calculated that

but "more than you think it will", "30% of the price of the new module" seem like realistic answers - someone posted that they'd built a braids and spent $50 on parts, that probably doesn't include a panel

the mouser part numbers are all in the boms so you can look up prices if you're curious

if you use your pure animal cunning and ebay you can probably do it for less

adam · Post by **adam** » Sat Mar 07, 2015 1:31 pm

dadacore wrote:@adam
regarding the payment still don't get if I have to wait for you to pm with the amount including shipping and a paypal address, or if I'm supposed to calculate it by my own..

it's ok i'm going to work it out - my heads a spinning

adam · Post by **adam** » Sat Mar 07, 2015 1:41 pm

spunkytoofers wrote:One for the shruthi digital Fx filter board !

i've added you for shruthi dsp - hope thats right

cane creek · Post by **cane creek** » Sat Mar 07, 2015 1:50 pm

Already bought 2x clouds

and would like to order

2 x Braids
1 x Frames
1 x Elements

adam · Post by **adam** » Sat Mar 07, 2015 1:59 pm

cane creek wrote:Already bought 2x clouds

and would like to order

2 x Braids
1 x Frames
1 x Elements

thanks - will add you for those, i've added everyone else on pages 5&6 to the lists - thank you all

twinT · Post by **twinT** » Sat Mar 07, 2015 2:05 pm

I'm in for
1 x Ambika MOBO

thanks !

monstrinho · Post by **monstrinho** » Sat Mar 07, 2015 3:18 pm

Please put me down for:

1 x Module Tester
1 x Elements
1 x Streams
1 x Frames

...plus 1 x Clouds from the other thread.

adam · Post by **adam** » Sat Mar 07, 2015 3:19 pm

thanks twinT & monstrinho

DJBRUTAL · Post by **DJBRUTAL** » Sat Mar 07, 2015 4:21 pm

DJBRUTAL wrote:In for:

1x Clouds (also posted in Clouds thread)
1x Braids
1x Elements
1x Ambika Mobo

Thanks!

Please add 1x Frames to my order. Edited my original post (top of this page) to reflect this addition.

jarvis · Post by **jarvis** » Sat Mar 07, 2015 4:38 pm

1x streams
1x ripples
1x clouds

maybe the clouds buy should be merged into this thread?

Morbid · Post by **Morbid** » Sat Mar 07, 2015 4:46 pm

Morbid wrote:So awesome .

1x elements
2x braids
1x Module Tester

Please add another elements PCB to my order.

adam · Post by **adam** » Sat Mar 07, 2015 4:48 pm

jarvis wrote:1x streams
1x ripples
1x clouds

maybe the clouds buy should be merged into this thread?

i have an ad hoc system in place for maintaining my sanity - clouds was the first buy i did and i think will be the first to close on monday morning - i'm basing the order with the pcb house on units paid for rather than units requested - then once that comes back i'll order the rest as long as the quality is ok

MOD WIGGLER

MOD WIGGLER

"Mutable" PCB's, delight in the selection