Disting MK4 - unable to change parameters on some of the algorithms

Discussion and support for Expert Sleepers' Silent Way software and hardware.

Moderators: Kent, os

Post Reply
ak_music
Learning to Wiggle
Posts: 2
Joined: Fri Feb 04, 2022 4:58 pm
Contact:

Disting MK4 - unable to change parameters on some of the algorithms

Post by ak_music »

I tried using L1 (Reverb) algorithm and found that I can't switch between the different parameters by pressing the z-knob. Except the three reverb algorithms I randomly checked others as well and found that some of them have the same behavior (e.g. K8 Delay).
Earlier I was on firmware 4.21 but even after upgrading to 4.22.1 the issue persists.
Here is the recording of the issue: Link to video
Am I missing something or did I get a faulty unit?
User avatar
os
Super Deluxe Wiggler
Posts: 17249
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Re: Disting MK4 - unable to change parameters on some of the algorithms

Post by os »

User manual page 8. Use 'S'.
ak_music
Learning to Wiggle
Posts: 2
Joined: Fri Feb 04, 2022 4:58 pm
Contact:

Re: Disting MK4 - unable to change parameters on some of the algorithms

Post by ak_music »

Thank you, Andrew.
This did work. I missed that method in the manual.
Post Reply

Return to “Expert Sleepers”