Application UTune / arpeggiator and switch

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
Llouwelyn
Wiggling with Experience
Posts: 264
Joined: Mon Aug 10, 2015 3:52 pm
Location: France

Application UTune / arpeggiator and switch

Post by Llouwelyn »

Hello,
This Application is possible?,
I want to send CV out via Midi out of my Keyboard of the Utune in Sequential switch and CV out of the Sequential switch return in to the Utune for Trigg and pitch my Synth P5.
This application is good for select each notes of the Arpegiator in the sequantial switch with different clock of each.
Thanks for your helps!
Sans titre.001.jpeg
Oups! LFO clock÷ 3 into Midi in.
Last edited by Llouwelyn on Mon Dec 27, 2021 10:29 am, edited 1 time in total.
User avatar
tubbutec
Ultra Wiggler
Posts: 845
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Re: Application UTune / arpeggiator and switch

Post by tubbutec »

yes, you can route DIN midi in to µTune CV out, and CV-in to DIN midi out.
All you need you can find in the Midi in and out settings and in channel config.

if you want to trigger midi out for each midi in event, you need to configure gate out as 'midi gate' and connect it to gate in.
If you want to use a different clock ( the /3 ?) you can connect it to gate in instead.
Llouwelyn
Wiggling with Experience
Posts: 264
Joined: Mon Aug 10, 2015 3:52 pm
Location: France

Re: Application UTune / arpeggiator and switch

Post by Llouwelyn »

Thanks you, this is possible to configure in channel 1 only or combinaison two channel requiert ?
Last edited by Llouwelyn on Mon Dec 27, 2021 10:27 am, edited 1 time in total.
User avatar
tubbutec
Ultra Wiggler
Posts: 845
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Re: Application UTune / arpeggiator and switch

Post by tubbutec »

One Channel is sufficient
Llouwelyn
Wiggling with Experience
Posts: 264
Joined: Mon Aug 10, 2015 3:52 pm
Location: France

Re: Application UTune / arpeggiator and switch

Post by Llouwelyn »

Merci
runmiles
Learning to Wiggle
Posts: 2
Joined: Fri Jan 14, 2022 8:38 am

Re: Application UTune / arpeggiator and switch

Post by runmiles »

A custom-built software solution is a highly customized version of a commercial application https://mlsdev.com/blog/top-custom-soft ... -companies. It is built to meet the exact needs of a specific organization. The best custom-made software can help organizations perform various functions. It can be used by Fortune 500 companies, midsize enterprises, and other businesses. It can be created in-house or can be developed by a third-party developer. It must follow a certain lifecycle that starts with the definition of the problem, the expectations, and the success.
Post Reply

Return to “Tubbutec”