Fade v1.2

Support and discussion for Antumbra modules and DIY builds

Moderators: Kent, antumbra

Post Reply
puzo
Common Wiggler
Posts: 163
Joined: Fri Mar 07, 2014 8:18 pm

Fade v1.2

Post by puzo »

Hi

Building a few fade v1.2 can’t see what the orientation of the three tl072’s.

No pics or build guide so help would be greatly appreciated.

Thanks.
User avatar
SyndieBot2000XL
Common Wiggler
Posts: 229
Joined: Sat Feb 16, 2019 2:45 pm
Location: Owe Hi-O

Re: Fade v1.2

Post by SyndieBot2000XL »

If you have a multimeter you can usually identify the pins on the board by checking for continuity to the power rails.
It began as a mistake.
puzo
Common Wiggler
Posts: 163
Joined: Fri Mar 07, 2014 8:18 pm

Re: Fade v1.2

Post by puzo »

Arrr yes. Clever. Thanks
Post Reply

Return to “Antumbra”