Deciding on my first Logic module

Cwejman, Doepfer, Erica, MakeNoise, Mutable instruments, TipTop Audio, Analogue Solutions, and much more! The world’s most popular format.
Be sure to look into MANUFACTURER SUB-FORA as well..

Moderators: Kent, luketeaford, Joe.

Jazz-Circuit
Common Wiggler
Posts: 144
Joined: Fri Feb 14, 2020 7:22 pm
Contact:

Deciding on my first Logic module

Post by Jazz-Circuit »

Hi, I am trying to decide on my first logic module. I am a fan of Joranalogue modules and have many of them, so I planned on eventually getting the Compare 2 but I am currently looking at the Klavis Logica XT since it fits in my current budget. Am I wrong to think that these 2 modules would compliment each other and the Logica XT would be a good choice for my first Logic module? To be honest with you I am not even sure what I would do with a logic module yet, but it's an area that is missing from my setup and I am excited to experiment using them. Thank you.
User avatar
Raymond
Wiggling with Experience
Posts: 452
Joined: Mon Feb 22, 2021 3:01 pm
Location: Paris
Contact:

Re: Deciding on my first Logic module

Post by Raymond »

I love joranalogue too but the first logic module I got was tool-box cause it is super straightforward and can do lots of stuff. You need some attenuators and all with it but it is a great... tool box.

https://www.modulargrid.net/e/steady-st ... e-tool-box

Oh and sorry I know nothing about the klavis.
Links to the music -->
https://linktr.ee/soundofraymond

New release - Only one should do it (microhouse/minimal)
https://open.spotify.com/album/3U1LDW0M ... Si_J3661yQ
User avatar
sir stony
Ultra Wiggler
Posts: 915
Joined: Mon Feb 25, 2019 6:09 pm
Location: Bavaria

Re: Deciding on my first Logic module

Post by sir stony »

If you don't need many logic functions at the same time, but want a wide variety of options in a small space, the Logica XT is the top choice. And it goes even beyond that. It has become something of a secret spice in my patch recipes since I got it.
The Compare 2 is of course mainly a comparator that offers basic logic outputs as an added bonus. You could just feed it gates and use it as an ordinary logic module like that, too, but as such it's not in the same league as the Logica. On the other hand, a comparator is a powerful tool to extract triggers or gates from any signal, and a classic feature that sets modular synths apart from non-modulars. This one -being a dual window type- is very probably the best of its kind in eurorack these days.
Both these modules are top, no doubt. But they are also both of a kind that is only really useful if you want to take your modular beyond basic analogue subtractive synth sounds and sequence patterns, and have a good idea of how to get there. Logic can do magic about rhythmic and functional structures, comparators are the miner's gold for stuff like generative patches and general extraction of timing from continuous signals. Used together, they can turn a modular system from "being just a synth" into a self contained playground of creation.
User avatar
mdoudoroff
Super Deluxe Wiggler
Posts: 4789
Joined: Fri Jul 17, 2015 8:10 am
Location: New York City

Re: Deciding on my first Logic module

Post by mdoudoroff »

Hard to top Logica XT for binary logic—it’s a great package/value. I have a Logica Gater and a Logica XT sitting next to my Compare 2.

The main trick with logic is to stop and think about how to improve your patch with it. It can require a little contemplation and trial & error.
User avatar
oilpanic
Wiggling with Experience
Posts: 333
Joined: Mon Sep 18, 2017 4:27 am
Location: Petaluma CA

Re: Deciding on my first Logic module

Post by oilpanic »

If you diy there is a new offering from Frequency Central.
User avatar
moremagic
Super Deluxe Wiggler
Posts: 1481
Joined: Wed Jun 23, 2010 8:45 pm
Location: NC
Contact:

Re: Deciding on my first Logic module

Post by moremagic »

i prefer to patch logic with vcas & offsetting attenuverters
User avatar
MvK
Veteran Wiggler
Posts: 585
Joined: Mon Nov 24, 2014 8:46 am
Location: Berlin

Re: Deciding on my first Logic module

Post by MvK »

I have the Klavis Logica XT, the Intellijel Plog, the Intellijel OR and the Joranalogue Compare 2. All of them are great. The logica XT alone would be not enough for me because if you get into logic and find out about all the great stuff you can do with it just one channel isn't enough IMO. The intellijel Plog is very powerful because it has 2 main channels and two different flip-flops on top of that. The intellijel OR seems not very exciting but it also acts as an analog max. Great for combining CVs. I generally don't use the Compare 2 for logic but I'm sure its fun.

If I would have to constrain myself to only one module it would be the Plog.
User avatar
Raymond
Wiggling with Experience
Posts: 452
Joined: Mon Feb 22, 2021 3:01 pm
Location: Paris
Contact:

Re: Deciding on my first Logic module

Post by Raymond »

And also my next logic purchase will be for sure the doepfer a-166 cause you have have two times AND, OR, XOR results available at the same time which can be inverted as well. For logic and utilities modules, it is quite hard to beat doepfer. Not always but quite often.

https://www.modulargrid.net/e/doepfer-a-166-
Links to the music -->
https://linktr.ee/soundofraymond

New release - Only one should do it (microhouse/minimal)
https://open.spotify.com/album/3U1LDW0M ... Si_J3661yQ
User avatar
Navs
Super Deluxe Wiggler
Posts: 4622
Joined: Fri Sep 18, 2009 3:49 am
Location: Berlin, Germany

Re: Deciding on my first Logic module

Post by Navs »

I would second the suggestion of the A-166 as a first logic module. It is simple, gives you the basic building blocks and allows you to learn/patch other configurations, like flip flops etc.
User avatar
XODES
Common Wiggler
Posts: 234
Joined: Wed Nov 06, 2019 2:32 pm
Location: France

Re: Deciding on my first Logic module

Post by XODES »

A bit of self-promotion here, as one might be interested in LB5, which gives simultaneous access to all basic logic functions as well as a flip-flop and is available whether in 3U or 1U formats :

https://www.modulargrid.net/e/xodes-lb5-3u

https://www.modulargrid.net/e/xodes-lb5-1u
Image   Image   Image   Image
Raindeer
Ultra Wiggler
Posts: 792
Joined: Fri Jun 19, 2020 2:45 am

Re: Deciding on my first Logic module

Post by Raindeer »

Navs wrote: Wed Apr 07, 2021 1:10 am I would second the suggestion of the A-166 as a first logic module. It is simple, gives you the basic building blocks and allows you to learn/patch other configurations, like flip flops etc.
I’d love to know how to patch a flip flop with my A-166. Is it possible? i.e. one trigger to go high, next trigger to go low.
User avatar
a773
Super Deluxe Wiggler
Posts: 1945
Joined: Fri Jan 30, 2015 8:21 am
Location: Copenhagen/Denmark
Contact:

Re: Deciding on my first Logic module

Post by a773 »

Raindeer wrote: Wed Apr 07, 2021 1:40 am I’d love to know how to patch a flip flop with my A-166. Is it possible? i.e. one trigger to go high, next trigger to go low.
I don't own a a-166 (I think I should get one...), but it seems possible:

https://en.wikipedia.org/wiki/Flip-flop_(electronics)
User avatar
Raymond
Wiggling with Experience
Posts: 452
Joined: Mon Feb 22, 2021 3:01 pm
Location: Paris
Contact:

Re: Deciding on my first Logic module

Post by Raymond »

a773 wrote: Wed Apr 07, 2021 2:12 am
Raindeer wrote: Wed Apr 07, 2021 1:40 am I’d love to know how to patch a flip flop with my A-166. Is it possible? i.e. one trigger to go high, next trigger to go low.
I don't own a a-166 (I think I should get one...), but it seems possible:

https://en.wikipedia.org/wiki/Flip-flop_(electronics)
This will definitely be my next logic module. It seems so useful. I love or/and functions and it can be self patch as well so it could give lots of crazy possibilities! Really excited about this module.
Links to the music -->
https://linktr.ee/soundofraymond

New release - Only one should do it (microhouse/minimal)
https://open.spotify.com/album/3U1LDW0M ... Si_J3661yQ
Raindeer
Ultra Wiggler
Posts: 792
Joined: Fri Jun 19, 2020 2:45 am

Re: Deciding on my first Logic module

Post by Raindeer »

a773 wrote: Wed Apr 07, 2021 2:12 am
Raindeer wrote: Wed Apr 07, 2021 1:40 am I’d love to know how to patch a flip flop with my A-166. Is it possible? i.e. one trigger to go high, next trigger to go low.
I don't own a a-166 (I think I should get one...), but it seems possible:

https://en.wikipedia.org/wiki/Flip-flop_(electronics)
Thanks. I looked at the Wikipedia article but it did not contain any guide to patching a flip flop with a A-166 ;) I did see that the answer could lie in feeding the output of two logic circuits back into each other’s inputs. I’ll need to study this later...

Or alternatively if someone has tried and succeeded it would be great to know how you did it. Apologies if this is a super simple logic question but I can’t quite figure it out.
User avatar
Raymond
Wiggling with Experience
Posts: 452
Joined: Mon Feb 22, 2021 3:01 pm
Location: Paris
Contact:

Re: Deciding on my first Logic module

Post by Raymond »

I don’t know for sure but I guess self patching could do the trick. Or at worse it should give some great unexpected results ! Daaammmn I want to buy it so hard but I can’t I’ll have to wait.
Those kinds of module very often make me much more excited than VCO or filters. I don’t know it seems it can give so much modulations, happy accidents and surprise !
Links to the music -->
https://linktr.ee/soundofraymond

New release - Only one should do it (microhouse/minimal)
https://open.spotify.com/album/3U1LDW0M ... Si_J3661yQ
User avatar
Agawell
Super Deluxe Wiggler
Posts: 2129
Joined: Mon May 04, 2015 3:22 am

Re: Deciding on my first Logic module

Post by Agawell »

Raymond wrote: Wed Apr 07, 2021 3:24 am I don’t know for sure but I guess self patching could do the trick. Or at worse it should give some great unexpected results ! Daaammmn I want to buy it so hard but I can’t I’ll have to wait.
Those kinds of module very often make me much more excited than VCO or filters. I don’t know it seems it can give so much modulations, happy accidents and surprise !
Once you actually know what you are doing, utilities and modulation in general are way more exciting that vcos and filters!!!!
Modular Audio and Video Synthesis on Instagram

Utility modules are the inexpensive, dull polish that makes the expensive, shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities

an oscillator is an oscillator - utilities are possibilities

choose the case to fit the modules - not the modules to fit the case!!!
User avatar
Agawell
Super Deluxe Wiggler
Posts: 2129
Joined: Mon May 04, 2015 3:22 am

Re: Deciding on my first Logic module

Post by Agawell »

oilpanic wrote: Tue Apr 06, 2021 11:11 pm If you diy there is a new offering from Frequency Central.
don't have to DIY - FC sell built modules too!

actually there are 2 new logic modules and an older one

the 2 new ones are the 2 halves of the older one split into 2 modules and doubled up by the look of it
Modular Audio and Video Synthesis on Instagram

Utility modules are the inexpensive, dull polish that makes the expensive, shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities

an oscillator is an oscillator - utilities are possibilities

choose the case to fit the modules - not the modules to fit the case!!!
User avatar
DJMaytag
Super Deluxe Wiggler
Posts: 1161
Joined: Thu Dec 03, 2015 11:59 am
Location: Madison, Wiscompton
Contact:

Re: Deciding on my first Logic module

Post by DJMaytag »

I guess Branches is technically my first logic module, albeit super simple. I've not gotten into much logic stuff until recently, until deciding to build some of the Frequency Central stuff. They've got a LOT to choose from, and I picked Cryptograf, Deep Thought, and High Towers so far. Logic Bomb and Reset Simulation could be additions to the setup soon.
DJMaytag IG | DJMaytag Reverb | Madisynths IG | Madisynths Reverb |

If you talk about improper grounding 3 times, Graham Hinton appears!” -djs
User avatar
Kingnimrod
Super Deluxe Wiggler
Posts: 2314
Joined: Wed Jul 18, 2012 8:54 pm

Re: Deciding on my first Logic module

Post by Kingnimrod »

Abstract Data also makes some nice logic modules
User avatar
Dcramer
Super Deluxe Wiggler
Posts: 5939
Joined: Fri Mar 29, 2013 12:11 pm
Location: Canada

Re: Deciding on my first Logic module

Post by Dcramer »

Logic is a tweeting bird! 🙀

But CV controlled Logic is the next logical step!

Plog for the win! 😻
Raindeer
Ultra Wiggler
Posts: 792
Joined: Fri Jun 19, 2020 2:45 am

Re: Deciding on my first Logic module

Post by Raindeer »

Dcramer wrote: Wed Apr 07, 2021 10:47 am But CV controlled Logic is the next logical step!
You’re saying we should apply logic to our choice of logic modules? These purchase decisions are becoming like Inception.
User avatar
Dcramer
Super Deluxe Wiggler
Posts: 5939
Joined: Fri Mar 29, 2013 12:11 pm
Location: Canada

Re: Deciding on my first Logic module

Post by Dcramer »

Raindeer wrote: Wed Apr 07, 2021 10:49 am
Dcramer wrote: Wed Apr 07, 2021 10:47 am But CV controlled Logic is the next logical step!
You’re saying we should apply logic to our choice of logic modules? These purchase decisions are becoming like Inception.
🤣🤣🤣
colligative
Learning to Wiggle
Posts: 6
Joined: Mon Jan 04, 2016 7:22 am
Location: Ontario, Canada

Re: Deciding on my first Logic module

Post by colligative »

My vote is for Plog as well. CV control and the flip flops that can act as clock dividers make it super useful. I love using it to get extra gate patterns from what I've already sequenced.
Happiness Forever
Wiggling with Experience
Posts: 471
Joined: Fri Jan 23, 2015 12:20 am
Location: Inside

Re: Deciding on my first Logic module

Post by Happiness Forever »

Plog is a LOT of fun. I only recently got mine and have been loving exploring with it.
The XODES LB5 looks like tasty fun as well and has been on my radar.
Klavis Logica XT I do not know, will go look at now.
________________
________________
User avatar
Navs
Super Deluxe Wiggler
Posts: 4622
Joined: Fri Sep 18, 2009 3:49 am
Location: Berlin, Germany

Re: Deciding on my first Logic module

Post by Navs »

Raindeer wrote: Wed Apr 07, 2021 2:55 am
a773 wrote: Wed Apr 07, 2021 2:12 am
Raindeer wrote: Wed Apr 07, 2021 1:40 am I’d love to know how to patch a flip flop with my A-166. Is it possible? i.e. one trigger to go high, next trigger to go low.
I don't own a a-166 (I think I should get one...), but it seems possible:

https://en.wikipedia.org/wiki/Flip-flop_(electronics)
Thanks. I looked at the Wikipedia article but it did not contain any guide to patching a flip flop with a A-166 ;) I did see that the answer could lie in feeding the output of two logic circuits back into each other’s inputs. I’ll need to study this later...

Or alternatively if someone has tried and succeeded it would be great to know how you did it. Apologies if this is a super simple logic question but I can’t quite figure it out.
Yes, just follow the schematics on the wikipedia page. There are also clear diagrams here: https://www.electronicshub.org/sr-flip- ... gic-gates/

These 'patches' can tie-up the whole module, but they're fun and can lead to interesting avenues. Another 'quick fix' flip flop is to use a clock divider: the /2 output changes state on each gate received (and has memory, and can be reset ...).

There are some good ideas in the original Nord Modular tutorial collated by James Clark: https://www.cim.mcgill.ca/~clark/nordmo ... logic.html

and there's an interesting patch in the Sport Modulator manual to achieve quadrature modulation (also a flip flop patch? :hmm: )
Post Reply

Return to “1U & 3U Eurorack Modules”