The new Dynamic Destiny from Macro Machines!

simond4zed · Post by **simond4zed** » Sat Jul 15, 2017 6:52 pm

@Axiom Crux - I've been asking on facebook and mail, but no response from you guys so far.

I also have a version with odd holes - did you ever make faceplates with holes fitted for standard rails? Would it be possible to get one of these?

I love the module too btw!

waggles · Post by **waggles** » Mon Mar 12, 2018 9:28 am

Anybody save the pdf of the manual? Link is dead

Daisuk · Post by **Daisuk** » Mon Mar 12, 2018 10:16 am

waggles wrote:Anybody save the pdf of the manual? Link is dead

Here you go:

waggles · Post by **waggles** » Mon Mar 12, 2018 11:04 am

Thanks!!!

j_dowe · Post by **j_dowe** » Sun Jul 15, 2018 4:32 pm

how does this module do with switching between different audio sources? will I experience pops, or does it smoothly transition?

Sinamsis · Post by **Sinamsis** » Sun Jul 15, 2018 4:34 pm

j_dowe wrote:how does this module do with switching between different audio sources? will I experience pops, or does it smoothly transition?

I think any switch will give you pops because you're switching audio at non zero crossing points. Samplers may have technology to avoid this, but I don't know of a sequential switch that does. I could be wrong.

Post by **Paranormal Patroler** » Sun Jul 15, 2018 5:28 pm

Not sure but I think the 206 has an audio mode for that reason. Either that or the 214 doesn't click with audio, or at least I remember reading as much somewhere around the forum. I never used either with audio so I can't claim that is the case but I'm fairly positive someone pointed out that this feature is not advertised as much as it ought to.

Bad memory, I know.

gnome666 · Post by **gnome666** » Wed Aug 08, 2018 9:50 pm

Daisuk wrote:
waggles wrote:Anybody save the pdf of the manual? Link is dead
Here you go:

THANK YOU!!!

saiteron · Post by **saiteron** » Fri Oct 11, 2019 10:56 am

i got one of these a while ago and while i'm having fun with it i just got to hunting down the manual and it led me here. the one i have doesn't have the sequencing modes (forward, reverse, pendulum, random); when i press both buttons it takes me first to active steps page, then clock divs, then back to the main page.

does anyone have a copy of the updated firmware and/or any advice on how to get the latest firmware and push the update?

Daisuk · Post by **Daisuk** » Sat Oct 12, 2019 3:26 am

If anyone ever wants one of these, send me a pm. I don't use mine a lot.

ignatius · Post by **ignatius** » Sat Oct 12, 2019 11:57 pm

i don't get pops when switching audio.

same w/the WMD SSM. it has tiny crossfades or something built in for switching audio i think.. i don't know how they did it but it's magic.

wetlands · Post by **wetlands** » Wed Nov 06, 2019 12:26 am

I'm getting the Dynamic Destiny to change states from Rene via Select Bus. Really cool for an aging module... The DD is not saving states after power off. The documentation vaguely says this is supported. Anyone get this to work?

SlagRalden · Post by **SlagRalden** » Sat Dec 19, 2020 3:12 pm

saiteron wrote: ↑Fri Oct 11, 2019 10:56 am i got one of these a while ago and while i'm having fun with it i just got to hunting down the manual and it led me here. the one i have doesn't have the sequencing modes (forward, reverse, pendulum, random); when i press both buttons it takes me first to active steps page, then clock divs, then back to the main page.

does anyone have a copy of the updated firmware and/or any advice on how to get the latest firmware and push the update?

mine also has this problem (should have tested it more thoroughly).... how can i fix this? firmware?

MOD WIGGLER

MOD WIGGLER

The new Dynamic Destiny from Macro Machines!

latest firmware and update procedure?

Re: latest firmware and update procedure?