Logger & Proxy Interface Model 283

Moderators: Kent, traffkin

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Logger & Proxy Interface Model 283

Post by traffkin » Thu Dec 24, 2020 9:13 am

This is an official introduction of a new family member, it does a lot and will become even more capable over time.

Currently, only the first of the three planned functional layers is ready - the Logger. The user gets 15 channel cv/pulse recorder and manipulator (10 cv + 5 pulses) with pretty long session time of 99 minutes 59 seconds 99 hundreds of second, 80 sessions total. Simple navigation system provides the speed and direction control of the recorded material, special cue points can be assigned for immediate jump. Tracks can be muted, recording can be switched on and off at any time during playing/recording and the state is always saved automatically.

The next layer of functionality will be the two-way full-duplex cv>midi/osc>cv interface (would need the upcoming Wormhole module). The midi/osc capabilities will be deep, for example the user could assign special formulas describing the behaviour of the incoming command streams, combining midi and osc into one (if desired) cv or pulse channel, and vice versa.

The last layer will be the total visualization on the upcoming Ground Control computer (not so far...) with full track editability by various tools like Bezier curves etc.

THE SPECIAL NOTE! the absence of "e" is intentional in Logger layer, otherwise an accidental preset change could have rather unpleasant consequences in live situations as well as in the studio usage.


IMG_5589.JPG
IMG_5590.JPG
the run is 20 units, as usual

price is $1700 USD, worldwide shipping included

technical stuff:

283_manual_en.pdf
(47.31 KiB) Downloaded 122 times
keen_model_283_v1.0.0.hex.zip
(144.21 KiB) Downloaded 37 times
update_routine.pdf
(14.06 KiB) Downloaded 48 times

elmerfudd
Wiggling with Experience
Posts: 323
Joined: Sun Apr 14, 2013 6:35 pm

Re: Logger & Proxy Interface Model 283

Post by elmerfudd » Thu Dec 24, 2020 1:06 pm

Merry Christmas indeed! Can't wait to order one!
Pax

User avatar
architexture
Wiggling with Experience
Posts: 282
Joined: Fri Nov 30, 2018 2:59 pm
Location: Portland, OR
Contact:

Re: Logger & Proxy Interface Model 283

Post by architexture » Thu Dec 24, 2020 3:55 pm

Looks awesome @traffkin !!!! Can't wait to see a demo :D

User avatar
Leoespejo
Super Deluxe Wiggler
Posts: 1542
Joined: Sat May 07, 2011 5:26 am
Location: Barcelona

Re: Logger & Proxy Interface Model 283

Post by Leoespejo » Sun Dec 27, 2020 8:27 am

Oh So Cool !!! OSC !!!


Man, really ned some description....

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Logger & Proxy Interface Model 283

Post by traffkin » Sun Dec 27, 2020 8:46 am

for the OSC the Wormhole will be needed :tu: which is on the way too...

please don't diminish the logger functionality :) i'm really proud of it :)

i'm working on the user manual, not an easy task...
Leoespejo wrote:
Sun Dec 27, 2020 8:27 am
Oh So Cool !!! OSC !!!


Man, really ned some description....

elmerfudd
Wiggling with Experience
Posts: 323
Joined: Sun Apr 14, 2013 6:35 pm

Re: Logger & Proxy Interface Model 283

Post by elmerfudd » Sun Dec 27, 2020 11:07 am

"please don't diminish the logger functionality :) i'm really proud of it :)"

I hope so, bought a 223 in anticipation of its greatness!
Don't stress on the manual, as slow as shipping has become, you will have a month after you ship them!

elmerfudd
Wiggling with Experience
Posts: 323
Joined: Sun Apr 14, 2013 6:35 pm

Re: Logger & Proxy Interface Model 283

Post by elmerfudd » Tue Dec 29, 2020 3:47 pm

Alex, just noticed something. LED marked GC, ground control? Also noticed no 'e' designation and no remote enable. Now I am totally intrigued, care to share anything??

User avatar
tIB
Stainer!
Posts: 9618
Joined: Mon Jun 08, 2009 5:28 am
Location: UK

Re: Logger & Proxy Interface Model 283

Post by tIB » Tue Dec 29, 2020 4:01 pm

So is it a multichannel CV recorder/playback with manipulation per group?

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Logger & Proxy Interface Model 283

Post by traffkin » Wed Dec 30, 2020 8:02 am

and with pulse-addressable cue-points, on-the-fly switchable recording on channels and some others...
tIB wrote:
Tue Dec 29, 2020 4:01 pm
So is it a multichannel CV recorder/playback with manipulation per group?

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Logger & Proxy Interface Model 283

Post by traffkin » Wed Dec 30, 2020 8:07 am

absence of the remote enable switch and "e" mark is intentional - consider this device as a recorder within a musical system, accidental changing the state of the recorder could be disasterous in live performance and frustrating in the studio work. but it can actually listen to the internal bus :)
elmerfudd wrote:
Tue Dec 29, 2020 3:47 pm
Alex, just noticed something. LED marked GC, ground control? Also noticed no 'e' designation and no remote enable. Now I am totally intrigued, care to share anything??

User avatar
tIB
Stainer!
Posts: 9618
Joined: Mon Jun 08, 2009 5:28 am
Location: UK

Re: Logger & Proxy Interface Model 283

Post by tIB » Wed Dec 30, 2020 8:13 am

traffkin wrote:
Wed Dec 30, 2020 8:02 am
and with pulse-addressable cue-points, on-the-fly switchable recording on channels and some others...
tIB wrote:
Tue Dec 29, 2020 4:01 pm
So is it a multichannel CV recorder/playback with manipulation per group?
Bravo!

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Logger & Proxy Interface Model 283

Post by traffkin » Sun Jan 10, 2021 5:48 pm

we officially taking orders on this beast now :)

manual is on the way too!

User avatar
deltaphoenix
Super Deluxe Wiggler
Posts: 1458
Joined: Sun Oct 14, 2012 6:41 pm
Location: Gainesville, FL

Re: Logger & Proxy Interface Model 283

Post by deltaphoenix » Mon Jan 11, 2021 7:59 am

Yay! So excited for the 283!

elmerfudd
Wiggling with Experience
Posts: 323
Joined: Sun Apr 14, 2013 6:35 pm

Re: Logger & Proxy Interface Model 283

Post by elmerfudd » Mon Jan 11, 2021 9:32 am

Payment sent!

User avatar
Leoespejo
Super Deluxe Wiggler
Posts: 1542
Joined: Sat May 07, 2011 5:26 am
Location: Barcelona

Re: Logger & Proxy Interface Model 283

Post by Leoespejo » Wed Jan 27, 2021 11:11 am

Ey Traffkin, as shipping started, is there a user manual on it's way?

It looks looks dense modul, so I think is really necessary.

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Logger & Proxy Interface Model 283

Post by traffkin » Wed Jan 27, 2021 11:30 am

of course there'll be a manual! i'm working on it every day...
Leoespejo wrote:
Wed Jan 27, 2021 11:11 am
Ey Traffkin, as shipping started, is there a user manual on it's way?

It looks looks dense modul, so I think is really necessary.

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Logger & Proxy Interface Model 283

Post by traffkin » Fri Feb 05, 2021 12:10 pm

perhaps someone could put it on Modulargrid?..

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Logger & Proxy Interface Model 283

Post by traffkin » Fri Feb 05, 2021 12:36 pm

uploaded use manual, well, sort of :confused:

User avatar
architexture
Wiggling with Experience
Posts: 282
Joined: Fri Nov 30, 2018 2:59 pm
Location: Portland, OR
Contact:

Re: Logger & Proxy Interface Model 283

Post by architexture » Mon Feb 08, 2021 7:38 pm

traffkin wrote:
Fri Feb 05, 2021 12:10 pm
perhaps someone could put it on Modulargrid?..
Done ;) https://www.modulargrid.net/u/keen-asso ... model-283-

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Logger & Proxy Interface Model 283

Post by traffkin » Mon Feb 08, 2021 9:23 pm

thanks a lot!
architexture wrote:
Mon Feb 08, 2021 7:38 pm
traffkin wrote:
Fri Feb 05, 2021 12:10 pm
perhaps someone could put it on Modulargrid?..
Done ;) https://www.modulargrid.net/u/keen-asso ... model-283-

User avatar
Leoespejo
Super Deluxe Wiggler
Posts: 1542
Joined: Sat May 07, 2011 5:26 am
Location: Barcelona

Re: Logger & Proxy Interface Model 283

Post by Leoespejo » Mon Feb 15, 2021 11:16 am

Just received mine......


I just touched the surface of it and can say that.... It's a f***ing MONSTER !!!


Thank you Keen Association
:omg:

User avatar
traffkin
Veteran Wiggler
Posts: 617
Joined: Tue Nov 17, 2009 5:23 am
Location: Moscow
Contact:

Re: Logger & Proxy Interface Model 283

Post by traffkin » Mon Feb 15, 2021 11:24 am

satisfied customer is the all-time pleasure :party:
Leoespejo wrote:
Mon Feb 15, 2021 11:16 am
Just received mine......


I just touched the surface of it and can say that.... It's a f***ing MONSTER !!!


Thank you Keen Association
:omg:

User avatar
Mannstrane
Common Wiggler
Posts: 55
Joined: Sat Dec 14, 2019 1:20 pm
Location: Los Angeles
Contact:

Re: Logger & Proxy Interface Model 283

Post by Mannstrane » Mon Feb 15, 2021 8:28 pm

Someone gonna post videos?

User avatar
seozian
Learning to Wiggle
Posts: 5
Joined: Tue Nov 26, 2019 12:59 pm
Location: Montreal

Re: Logger & Proxy Interface Model 283

Post by seozian » Tue Feb 16, 2021 1:07 am

I received mine today!

Recently I’ve been trying to coax the slowest movements I can out of my 200e and this module is a game changer. My initial experiments involved slowing down playback to its minimal value which gave me the very long envelopes I was longing for.

Thank you! :alien:
:buchla:

User avatar
Leoespejo
Super Deluxe Wiggler
Posts: 1542
Joined: Sat May 07, 2011 5:26 am
Location: Barcelona

Re: Logger & Proxy Interface Model 283

Post by Leoespejo » Mon Mar 08, 2021 6:30 am

Hi,

I'm diving into this deep module, first I have some questions and later depending on he answers, maybe some suggestions.

- Is there a way to make the module change preset with the preset manager ?
- Can the state stopped/running be saved with the preset ?


thanks
Leo

Post Reply

Return to “Keen Association”