Support and discussion for Antumbra modules and DIY builds
6 posts • Page 1 of 1
I just finished building a batch of 4 Antumbra 6MIX v1.1. Neat little utility module and worth every penny (i.e. virtually none), so I'd like to formally state that I'm rather pleased with it -- thanks for providing this project!
- Common Wiggler
- Posts: 115
- Joined: Sun Apr 21, 2013 4:44 pm
- Location: Switzerland
As far as I can tell TL072CD should be fine. Side by side in mouser every spec is identical. If you look at the data sheet and search for "TL072I" and "TL072C", the only difference I see is that the TL072CD has a wider range of min/max voltage/current for a few pins.
The only difference between the I and C ones is that the former has extended operating temperatures (-40 to 125°C instead of 0 to 70), so unless you'll be running your synth in an oven or are taking it to the Arctics it won't matter.