looking for MU Panel designs and a question about MIDIDAC

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, Synthbuilder

Post Reply
User avatar
hamildad
Super Deluxe Wiggler
Posts: 1321
Joined: Sun Jul 01, 2012 10:46 am
Location: London

looking for MU Panel designs and a question about MIDIDAC

Post by hamildad » Tue Sep 07, 2021 10:03 am

Hi there,

Despite parts shortages turning this into a 6 month+ endeavor, I am looking for Panel layouts in MU for the following oakley panels:

Oakley MIDI DAC - note: I really want to use the Krisp1 style midiDAC with 2x 4mults on it as I normally mult any gate/CV as a matter of course.
ASDR/VCA
VC/ASDR Upgrade (1MU wide to add next to ASDR/VCA)

if anyone has the designs, I can get the panels made up, I just have no fpd experience and can guarantee I will mess up the hole placement etc when converting the MOTM templates on the Oakley website.

Also

I also wanted to use the MIDI THRU socket on the MIDI DAC to accommodate a Hobbytronics MIDI HOST PCB and then be able to use either 5pin DIN MIDI or USB MIDI straight into the module.

https://www.hobbytronics.co.uk/usb-host-board-v24

I would never use both so wiring both into the MIDI input on the PCB should work, and as the hobbytronics needs 5V, I can take that from the MU power supply.

Has anyone tried similar? as a USB Host & DIN MIDI to CV interface would be the dream
My Synth Instagram here * My Synth videos here
-
External PSUs and DC jacks are the hallmarks of toys. - Graham Hinton.
-
This is primarily for melody and historical educational purposes - Analogue Music

Post Reply

Return to “Oakley Sound Systems”