DigiKey Caps

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, Synthbuilder

Post Reply
User avatar
oozitron
solder fume huffer
Posts: 857
Joined: Fri Jan 23, 2009 6:11 pm
Location: in a beautiful place out in the country

DigiKey Caps

Post by oozitron » Sat Feb 06, 2021 10:39 pm

Building my ADR30, and there was one mistake (not my mistake!) in my parts order:
27E65656-BE0D-4998-8BA0-6D84540594C7.jpeg
Oops...

I have a couple 50volt 47p NPO Xicon Ceramic Disc caps in my old parts stash. Would these be OK to use in the ADR30 (for C54 & C57) ?

Or do I really need to get the C0G caps? (hopefully they would send them to me for free)

Thanks :-)
Andrew
Never want to come down, never want to put my feet back down on the ground

User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3191
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Re: DigiKey Caps

Post by Synthbuilder » Sun Feb 07, 2021 4:44 am

oozitron wrote:
Sat Feb 06, 2021 10:39 pm
I have a couple 50volt 47p NPO Xicon Ceramic Disc caps in my old parts stash. Would these be OK to use in the ADR30 (for C54 & C57) ?
Yes. NP0 is the same as C0G. Just different codes for the same product. You'll see on the Digikey label that the caps are described as C0G/NP0.

Your biggest challenge will be find a project for those 6 way surface mount switches. ;)

Tony

User avatar
oozitron
solder fume huffer
Posts: 857
Joined: Fri Jan 23, 2009 6:11 pm
Location: in a beautiful place out in the country

Re: DigiKey Caps

Post by oozitron » Sun Feb 07, 2021 11:38 am

Synthbuilder wrote:
Sun Feb 07, 2021 4:44 am
Your biggest challenge will be find a project for those 6 way surface mount switches. ;)
Sounds like a challenge for the Oakley Creative Design Team :sb:

Maybe some kind of tiny keyboard controller for slow-moving ambient melodies?

thanks again,
Andrew
Never want to come down, never want to put my feet back down on the ground

Post Reply

Return to “Oakley Sound Systems”