Voting open for your top 3 tracks in our Odd Meter Remix/ReMangle/Reimagine Challenge

Prizes generously donated by:
ADDAC System (Eurorack 3U)
Endorphin.es (Eurorack 3U)
Fred's Lab (DIY Paraphonic Synth)
Northern Light Modular (Buchla-format h-series OR Eurorack3U)
Rattly and Raw (Wiggler Approved Kontakt Instrument)
Studio.h (Buchla-format 4U)

Get your vote on and free 42 minute modular playlist for your listening pleasure.

ADR30 Socket Board

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, Synthbuilder

Post Reply
User avatar
oozitron
solder fume huffer
Posts: 861
Joined: Fri Jan 23, 2009 6:11 pm
Location: in a beautiful place out in the country

ADR30 Socket Board

Post by oozitron » Sun Nov 22, 2020 3:10 pm

Can the ADR30 was built *without* the SREIO socket board?

ie. is there any circuitry on the SREIO (besides the anti-thump) that is necessary to its functioning?

thanks :-)
Andrew
Never want to come down, never want to put my feet back down on the ground

User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3215
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Re: ADR30 Socket Board

Post by Synthbuilder » Mon Nov 23, 2020 5:12 am

oozitron wrote:
Sun Nov 22, 2020 3:10 pm
Can the ADR30 was built *without* the SREIO socket board?
Yes. Bear in mind that the I/O connector on the ADR30 is designed for a 0.1" IDC boxed header which is a little small to be soldering flying wires onto. It's no worse than soldering to stripboard though.

Tony

Post Reply

Return to “Oakley Sound Systems”