What would you require from S&H?

Modular and other sound devices from BugBrand.

Moderators: Kent, BugBrand

User avatar
wuff_miggler
Super Deluxe Wiggler
Posts: 1312
Joined: Wed Feb 19, 2020 11:11 pm
Location: Disney, Australia

Re: What would you require from S&H?

Post by wuff_miggler » Wed May 26, 2021 6:06 pm

^ i guess a quantizer is more expensive than what you mention - i didnt think about it like that :-)

User avatar
justin3am
Let's go do some crimes
Posts: 1608
Joined: Mon Aug 25, 2008 8:26 pm
Location: Southern California

Re: What would you require from S&H?

Post by justin3am » Wed May 26, 2021 11:50 pm

I frequently use sample and hold with sequencers, so that the voltage only changes on steps with active gates. Sometimes the gate occurs like, when the CV sequencer is transiting from one voltage to another and so the sequence ends up sounding wrong. In these cases I use a gate delay to make sure that the sample and hold is triggered a little later, when the voltage from the CV sequencer is at the target voltage. It might be cool if something like that were built into the sample and hold.

Perhaps there could be a threshold for 'movement' which would make the module wait until the incoming voltage is stable enough to be sampled. If this were on a variable control, I bet it could have more creative uses when sending noiser or smoothly varying signals to the input.

User avatar
GryphonP3
Super Deluxe Wiggler
Posts: 1011
Joined: Tue Jan 29, 2013 3:20 pm
Location: Los Angeles

Re: What would you require from S&H?

Post by GryphonP3 » Thu May 27, 2021 4:06 am

Potch isnt important for me ... is it possible to just have an extremely primitive 12tone quantizer onboard that can be switched on if desired?
My cat can eat a whole watermelon ...

User avatar
joncharliefeathers
Common Wiggler
Posts: 135
Joined: Thu Dec 15, 2016 3:40 pm
Location: Uk
Contact:

Re: What would you require from S&H?

Post by joncharliefeathers » Tue Jun 22, 2021 11:20 am

Would it be possible to include a comparator with threshold control and a gate output. Combined with S&H I see this is a great bonus feature. Set the threshold which follows the S&H CV output and fires a gate when exceeded.

User avatar
petro
Learning to Wiggle
Posts: 7
Joined: Wed Oct 11, 2017 9:15 am

Re: What would you require from S&H?

Post by petro » Wed Jun 30, 2021 2:04 am

was looking at the PRC2B Noise Crusher, it seems like an interesting and unique design. something identical to a noise crusher ?
Muff

User avatar
chrisdermo
Ultra Wiggler
Posts: 964
Joined: Sun May 20, 2012 1:52 pm

Re: What would you require from S&H?

Post by chrisdermo » Wed Jun 30, 2021 2:21 am

petro wrote:
Wed Jun 30, 2021 2:04 am
was looking at the PRC2B Noise Crusher, it seems like an interesting and unique design. something identical to a noise crusher ?
:hihi:
WTB / WTTF: Bugbrand PRC2B, ENV1

Current Bugs frame:
https://www.modulargrid.net/f/racks/view/1340165

User avatar
kosta
Common Wiggler
Posts: 86
Joined: Tue Feb 10, 2009 3:33 pm
Location: New York, NY

Re: What would you require from S&H?

Post by kosta » Thu Jul 01, 2021 3:59 pm

How many PRC2B were made? That seems to be the one that everyone's after. (Me included!)

User avatar
BugBrand
Knowledge of Bugs
Posts: 7666
Joined: Tue Jul 15, 2008 11:59 am

Re: What would you require from S&H?

Post by BugBrand » Thu Jul 01, 2021 5:21 pm

Maybe 50?
I thought I was about done with a new version (very similar) - even got panels done - but... still had issues which felt too ARGH for me to complete/release

User avatar
kosta
Common Wiggler
Posts: 86
Joined: Tue Feb 10, 2009 3:33 pm
Location: New York, NY

Re: What would you require from S&H?

Post by kosta » Fri Jul 02, 2021 10:20 am

Sounds like probably you should just make a few more Old Blues then. :hihi: :party:

k_bntzn
Wiggling with Experience
Posts: 439
Joined: Fri Jun 06, 2008 9:44 am

Re: What would you require from S&H?

Post by k_bntzn » Sat Jul 03, 2021 12:26 pm

I vote for one last run of old blue! :hihi:

User avatar
kosta
Common Wiggler
Posts: 86
Joined: Tue Feb 10, 2009 3:33 pm
Location: New York, NY

Re: What would you require from S&H?

Post by kosta » Mon Jul 05, 2021 2:59 pm

:goo: :party: :razz:

Post Reply

Return to “BugBrand Devices”