Post pics of your DIY setup!

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, Joe., luketeaford

Post Reply
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post pics of your DIY setup!

Post by falafelbiels »

I noticed other sub-forums have this and although they have impressive systems in them, they just don't thrill me as much as seeing DIY stuff!
Now the search function couldn't find me a similar thread in Music Tech DIY so I thought why not?

I guess I'd better kick off.

Image

This is where I'm at after about one and a half year of DIY. Please ignore the Tyme Sefari, not that I don't like it but anyway...

WHERE YOURS AT?!


Dear Mod,
If a similar thread does exist, or maybe this belongs in DIY Forum Challenge (though I don't know about that), please move it to there and I'll edit the nonsense out.
User avatar
Luka
Super Deluxe Wiggler
Posts: 5437
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka »

i dont think we have done this yet - nice idea


Image
User avatar
Low-Gain
Super Deluxe Wiggler
Posts: 2695
Joined: Thu Apr 22, 2010 12:49 pm
Location: St. Paul, MN
Contact:

Post by Low-Gain »

Very nice systems guys! looks very productive. i'll post once i get my studio back in order.

falafelbiels: i like your tank. :)
User avatar
decaying.sine
Broken <--> Fixed
Posts: 5401
Joined: Wed Jun 03, 2009 10:05 pm
Location: New Haven, CT USA

Post by decaying.sine »

Here is my SDIY building zone. This is an older pic. I have two more of those big gray things filled with ICs now. My o-scope is on another desk. I am switching over to an L-shaped desk since it is a little bigger.

I have an ikea drawer thingy that I store PCBs and panels in. I have been collecting them while working on my skills.

Here is my at home etching setup in this thread.
viewtopic.php?t=24244&highlight=etching

I guess I don't have a lot of pics of my builds because most of them are at various stages of stuffing and wiring. I'll have to post a few when I get a little further.

Image
Image
Image
Brian
"I must create a system or be enslaved by another mans; I will not reason and compare: my business is to create." William Blake

"Vactrols ringing, Dude." "Thank you Donny"
User avatar
russma
Super Deluxe Wiggler
Posts: 1403
Joined: Mon Nov 10, 2008 7:50 pm
Location: Duvall, WA, USA

Post by russma »

...soothing candle FTW.

:guinness:
Russ M.
User avatar
parasitk
Learn to swim
Posts: 4992
Joined: Thu May 15, 2008 11:47 am
Location: Queens, NY
Contact:

Post by parasitk »

I don't have any good pics of my workspace at the moment, but here's my in-progress DIY synth (I've posted these around before):

Image
Coppersynth, October 2010 by parasitk, on Flickr

Image
Coppersynth patched by parasitk, on Flickr

Image
Coppersynth patched by parasitk, on Flickr

I have the 292c clones and Mankato done. The Mankato doesn't work at the moment and I have no idea why. I'm in the middle of wiring the Living VCOs right now.

Next year I start a second row after I've moved and have my workspace all set up again! :sadbanana:
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

It got stickied even! :party: For a minute I couldn't find it anymore huhuh...

Luka
I really love the live rig you're working on. The ultimate in SDIY or somewhere damn near!

Low-Gain
The Leman Russ or the Land Raider? The Land Raider is pretty DIY and belongs in the pic really. Too bad it will never be finished...

decaying.sine
That is ridiculously neat! My place looks like an outhouse. Get wiring man!

parasitk
That is ridiculously beautiful...
:eek:
User avatar
decaying.sine
Broken <--> Fixed
Posts: 5401
Joined: Wed Jun 03, 2009 10:05 pm
Location: New Haven, CT USA

Post by decaying.sine »

No kidding. So much wiring to do!

Another thing I added to the little work area was a true HEPA filter. It is awesome at sucking up the solder fumes. I basically solder right in front of it and don't have to open the window. I picked up the idea from a post here, I believe, and a recommendation on the filter by xart's post.

Coppersynth is unbelievably beautiful isn't it? Actually, I'm always impressed by all the amazing DIY panel styles. Pretty inspiring stuff.
Brian
"I must create a system or be enslaved by another mans; I will not reason and compare: my business is to create." William Blake

"Vactrols ringing, Dude." "Thank you Donny"
User avatar
Low-Gain
Super Deluxe Wiggler
Posts: 2695
Joined: Thu Apr 22, 2010 12:49 pm
Location: St. Paul, MN
Contact:

Post by Low-Gain »

decaying.sine: NOW THAT'S A CLEAN SPACE !! wow. i wish my benches could be that clean. >_<
User avatar
Luka
Super Deluxe Wiggler
Posts: 5437
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka »

haha same

mine become that clean about once per quarter and then they slowly become a landfill. good idea with the air filter. you would really need it in that space looking at the angle of the wall

i like to see that other people patch up their unfinished modules just to see what it looks like when in operation :)
User avatar
decaying.sine
Broken <--> Fixed
Posts: 5401
Joined: Wed Jun 03, 2009 10:05 pm
Location: New Haven, CT USA

Post by decaying.sine »

It's an attic room and you are correct about the ceiling angle. The DIY desk I am switching to is beside the window in the same room, but that little filter sucks up everything even on the lowest setting. It's been a nice surprise and addition.

I do need to finish up my stuff so I can show off my lovely nice-racks.com burgundy MOTM 5U cabinet.

I have a matching cabinet that is modcan A format. I am going to do some panel designs for that one in anodized blue to match my MegaOhm built modules. Phi's got a great design style and I am going to DIY with that in mind.
Brian
"I must create a system or be enslaved by another mans; I will not reason and compare: my business is to create." William Blake

"Vactrols ringing, Dude." "Thank you Donny"
User avatar
sduck
experimental use of gravity
Posts: 14736
Joined: Wed Feb 18, 2009 6:03 pm
Location: Vortepexaion, TN, USA

Post by sduck »

I thought we had already done this, but I guess not! This is a few months old...

Image

and the scary hole in my garage I put the stuff together...

Image
User avatar
Luka
Super Deluxe Wiggler
Posts: 5437
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka »

i think we have done the workspace thing but not had a thread to show off DIY synths. here is one side of my workspace (the other side has a drillpress and a shelf full of components)

Image[/img]
User avatar
decaying.sine
Broken <--> Fixed
Posts: 5401
Joined: Wed Jun 03, 2009 10:05 pm
Location: New Haven, CT USA

Post by decaying.sine »

Luke. Great curtains. David Lynch fan?
Brian
"I must create a system or be enslaved by another mans; I will not reason and compare: my business is to create." William Blake

"Vactrols ringing, Dude." "Thank you Donny"
User avatar
Luka
Super Deluxe Wiggler
Posts: 5437
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka »

:) - i think some days i probably make as much sense at a lynch film

i got these curtains from an op shop for party decor but they were so nice they mostly lived in my house with the odd excursion once in awhile for special installations.
User avatar
RF
Common Wiggler
Posts: 184
Joined: Fri Mar 13, 2009 7:24 am
Location: Minnesota Northwoods

Post by RF »

Great idea for a thread - You all have great looking setups, but jeese sduck, that's a beautiful system..

Here's my modular a few months back - I got all the empty spaces filled with modules a week or two ago... But I still have a backlog of projects which may mean starting a new cab.

bruce
Attachments
modular.jpg
modular.jpg (201.48 KiB) Viewed 16429 times
www.sdiy.org/rfeng
"This is the amplifier, which amplifies the sound. And this is the preamplifier, which, of course, amplifies the pree."
-Bullwinkle
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4155
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:

Post by andrewF »

this is a bit old but you get the idea

Image

Image
i wish i had coloured patchcords.............. :doh:
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

What is that thing in the bottom pic, Andrew?
User avatar
Rod Serling Fan Club
aquatic hitchhiker
Posts: 3760
Joined: Mon Dec 14, 2009 12:13 am
Location: MNTN

Post by Rod Serling Fan Club »

wow, crazy setups. So far all my DIY modules are lying strewn about waiting for a case. I can't decide what kind of case I want to make, stained wood, tolex, I dunno...
User avatar
Luka
Super Deluxe Wiggler
Posts: 5437
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka »

if i had the chance again i think i would have not made my big wood case
even though making that case was so satisfying

the angled mixer rack cases are the best as you can use them so many ways
you can sit them on bench vertical or horizontally - you can take them out of your studio - you can put your racks effects in there. so useful

(i was 100% influenced by spbaker here)

Image

this is my gig rig now
User avatar
rico loverde
Super Deluxe Wiggler
Posts: 4039
Joined: Fri Aug 06, 2010 10:40 am
Location: Portland, Oregon

Post by rico loverde »

holy shit AndrewF thats a sic set up. love the mannequins...didnt realize you had done those. seen some pix of em before i believe. very colorful!!!
works for Darkplace Manufacturing
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4155
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:

Post by andrewF »

falafelbiels wrote:What is that thing in the bottom pic, Andrew?
it is recycled from a PKE studio mixer (as is most of that synth).
It is now a 20 stage 'binary-programmed' sequencer. Each column of push switches is wired to be an 8-bit selector.

The remaining 8 columns of push switches are used to set up programmable gate outputs from the Milton.
User avatar
Luka
Super Deluxe Wiggler
Posts: 5437
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka »

im not sure if i have asked this before but how they hell do you wire stuff inside the mannequins? it must be hard to mount everything but to wire it then makes it seems impossible. do you slice them open first?
User avatar
andrewF
Super Deluxe Wiggler
Posts: 4155
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:

Post by andrewF »

its a real shit trying to wire down in the crotch region......
basically made a door out of the back (same for the back of the head)
the boards are stacked and bolted all over the place

Image

Image
User avatar
Luka
Super Deluxe Wiggler
Posts: 5437
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka »

we have put lights and piece of mirror inside them before and it was a nightmare - i was always blown away by how much sweat and tears (and swearing) it would have been to make your ones
Post Reply

Return to “Music Tech DIY”