Looking for a builder? Post here!

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, luketeaford, Joe.

Post Reply
snowtires
Wiggling with Experience
Posts: 261
Joined: Fri Jun 03, 2016 12:58 pm

Re: Looking for a builder? Post here!

Post by snowtires » Mon May 17, 2021 12:18 pm

PM me if you are in the US and would build a Per|former for me. I have boards and can ship parts to you. I would try to build it but I want a module to actually work for a change. PM me your rates if interested.

freakness
1-Post Wiggler
Posts: 1
Joined: Sun May 23, 2021 12:53 pm

Re: Looking for a builder? Post here!

Post by freakness » Sun May 23, 2021 6:30 pm

Looking for somebody to get my NLC 8hp triple sloths in working order and tell me where I messed up. I've built SMD NLC modules before, but I bit off more than I can chew on this one.

PM me your rates

Edit - I found somebody. Thanks for the messages everybody!

User avatar
Oldstench
Super Deluxe Wiggler
Posts: 2478
Joined: Thu Jun 24, 2010 9:26 am
Location: 5th, no, 6th circle of Hell

Re: Looking for a builder? Post here!

Post by Oldstench » Thu Jun 10, 2021 10:44 am

I have a euro Klee build that I screwed up somehow ~3 years ago. I'm looking for someone to troubleshoot/fix it if possible. Here is the start of my troubleshooting in the main Klee thread if you want to see what is wrong and what I've done to try and figure it out with NV's gracious help. In US. Please PM me your rates. Thank you.
Humanity has doomed itself.

User avatar
whyfarer
Wiggling with Experience
Posts: 320
Joined: Sat Mar 11, 2017 11:44 pm
Location: The Questioning Zones

Re: Looking for a builder? Post here!

Post by whyfarer » Sun Jun 13, 2021 11:29 am

I have a lyra8 pcb + flounderguts expander pcbs/panel and most/all components sourced. I've been trying to sell it since I don't have the time to build it, but the other option is to find someone willing to take build it. Please PM me with info on your rates if you might be interested in building this for me.

jmax313
Common Wiggler
Posts: 149
Joined: Thu Feb 22, 2018 7:42 am

Re: Looking for a builder? Post here!

Post by jmax313 » Mon Jun 14, 2021 5:59 pm

Anyone in NYC? I have a Nava 909 kit I [mostly] built, but am having some issues and want someone to finish troubleshooting as I just do not have the time. Please PM me and I'm happy to describe further :-)

User avatar
Zijnzijn Zijnzijn!
Common Wiggler
Posts: 175
Joined: Fri Dec 06, 2013 8:52 pm
Location: Cincinnati

Re: Looking for a builder? Post here!

Post by Zijnzijn Zijnzijn! » Sat Jun 19, 2021 9:50 am

Looking for someone who can laser-cut a top panel for the Bastl 60knobs for me, without any of the print on it. Got a used one a bit ago with all of the drum machine labels on it and would love a blank slate instead!

User avatar
Buttons ARE toys
Wiggling with Experience
Posts: 472
Joined: Wed Sep 14, 2016 9:24 am
Location: Earth

Re: Looking for a builder? Post here!

Post by Buttons ARE toys » Tue Jun 22, 2021 10:35 am

If anyone here would be willing to put together a BJF Universal Reverb Driver for me, please send me a PM. I contacted PrimoFX to see if I could get an assembled unit but unfortunately they do not build kits to order.

https://www.primofxllc.com/product-page ... reverb-kit
Astronomical Dusk - a web radio show of synthetic delights and collected oddities. Airs monthly at astronomical dusk.

minimal_modular
Common Wiggler
Posts: 118
Joined: Thu Feb 18, 2021 2:51 pm

Re: Looking for a builder? Post here!

Post by minimal_modular » Fri Jul 02, 2021 7:24 pm

Redundant. :cloud:

smartanimal
Learning to Wiggle
Posts: 16
Joined: Thu Feb 26, 2015 5:19 pm
Location: San Diego

Re: Looking for a builder? Post here!

Post by smartanimal » Thu Jul 08, 2021 3:36 pm

Could anyone diagnose and fix a problem with a Random*source VCFQ? I'm considering buying a broken one if the repair is possible.
Last edited by smartanimal on Sun Jul 11, 2021 12:16 pm, edited 1 time in total.

User avatar
diophantine
Super Deluxe Wiggler
Posts: 2447
Joined: Mon Jan 10, 2011 2:50 pm
Location: San Diego, CA, USA

Re: Looking for a builder? Post here!

Post by diophantine » Fri Jul 09, 2021 10:04 pm

While I'm an experienced DIY-er, I just can't get along with SMT for a variety of reasons. I can do a dozen SMT decoupling caps or so, or a couple ICs, but beyond that it just takes way too long and is too stressful. I am, however, comfortable debugging and fixing things with SMT.

I'd love to find an experienced builder in the US (preferably Southern California) who would be willing to do some SMT soldering for me. I'd like to (and prefer) to take care of the through-hole work and final assembly stuff myself.

Things I have ready-to-go or have in mind:
- FoH Plague Bearer, IMP, Choices [which will eventually go behind frac panels]
- Deckard's Dream SMT caps
- MidiBox Seq V4+ SMT parts
- NLC PCBs

If you're interested, please PM me to discuss details, fees, etc. Thanks!

24framemedia
Learning to Wiggle
Posts: 3
Joined: Sun Jul 11, 2021 11:50 am

Re: Looking for a builder? Post here!

Post by 24framemedia » Sun Jul 11, 2021 11:57 am

I'm new here and was directed to this forum as I am looking for someone who has the skills and experience with synth builds from kits. I am looking for someone located in the U.S. I'm in Minnesota. Would love to chat with anyone who may have experience that may be for hire. Thanks!

User avatar
srfnsmy
Common Wiggler
Posts: 111
Joined: Thu Jan 22, 2015 5:10 pm
Location: Los Angeles

Re: Looking for a builder? Post here!

Post by srfnsmy » Tue Jul 13, 2021 11:43 am

Hello - are there any diy/techs in Japan on this forum? Asking for a friend in Kanazawa, Ishikawa. Serge Modular experience a plus! :help:

silverstrider
Learning to Wiggle
Posts: 8
Joined: Sun Jan 07, 2018 10:31 am

Re: Looking for a builder? Post here!

Post by silverstrider » Wed Jul 14, 2021 11:22 am

Hi,

Looking for someone to help with a new module design. Perhaps first in a family of modules.

This will hopefully be commercial, and can pay reasonable rates.

PM me if of interest and I can give more detail. I'm based in Cambridge UK.

User avatar
JMJARw
Learning to Wiggle
Posts: 4
Joined: Sun Jul 18, 2021 4:54 am

Re: Looking for a builder? Post here!

Post by JMJARw » Sun Jul 18, 2021 6:18 am

Seeking for Electronics Wizard in Finland (around Pirkanmaa-
region) à la MICHEL GEISS and/or PATRICK PELAMOURGUES .
Collage 2021-07-18 13_56_35~2.jpg

Wanted : Electrician (/gifted hobbyist) for synthesizer/sequen-
cer Diy-projects. Also general aiding in the studio; composing,
recording (on Hardware mostly) etc.

It would be preferable for the person to be available for long
hours for a day/night for sessions (when needed) or on
constructing special Diy-project(s).

Open to throw in own ideas , on solitary,independent work
also as well as working in pairs (or team-work if the situation
thus requires).

Please contact, only serious (but not Too serious :hihi: )
messages, Thank you.

With Best Regards :

J.M.Järvinen
Pirkanmaa , Finland

skryex
Common Wiggler
Posts: 58
Joined: Sat Oct 07, 2017 11:25 pm
Location: Paris

Re: Looking for a builder? Post here!

Post by skryex » Thu Jul 22, 2021 7:14 am

Hello,
Anyone in Paris who could build this Quad LPG (very similar to Buchla) ?
https://synthcube.com/cart/dj-thomas-wh ... e-quad-lpg

User avatar
ŘłB23³
Common Wiggler
Posts: 215
Joined: Thu Dec 03, 2020 8:15 pm
Location: Cincinnati

Re: Looking for a builder? Post here!

Post by ŘłB23³ » Sun Jul 25, 2021 6:47 pm

So about 6 months ago I put out feelers for a builder and had a few different responses from people. Ultimately after a bit of back n forth I went w Nick Thorburn now I live in Ohio and Nick is in Ontario so the transport of modules was a bit pricey but I have to say it was worth every penny. I've built quite a few modules on my own but when it comes to SMd these ol eyes just aren't up to the task, I was afraid I'd mess something up so I entrusted the task to Nick and he did a stellar job. He was always very communicative and responsive to all my inquiries, so all you guys and gals w your NLC kits and whatever else, if you need a top notch builder with an exceptional skillset for your next module dont hesitate to contact Nick. He's an excellent builder and one heck of a good dude to boot!

etckla
Common Wiggler
Posts: 97
Joined: Wed Aug 12, 2020 1:12 pm

Re: Looking for a builder? Post here!

Post by etckla » Mon Jul 26, 2021 5:12 am

I'm based on London UK and want to upgrade the PSU on my eurorack case (current psu is underpowered). I'm looking to hire a local technician who'll help me pick a good solution and fit it. Please drop me a PM If you can point me in the right direction, Thanks!

gb2
Common Wiggler
Posts: 100
Joined: Thu Feb 25, 2016 9:51 am

Re: Looking for a builder? Post here!

Post by gb2 » Wed Jul 28, 2021 4:34 am

i'm looking for someone to build me this: http://www.antumbra.eu/modules/tune
should be pretty easy, but still too hard for me :)
EU/germany preferred.

sorted

User avatar
CliffordMilk
Wiggling with Experience
Posts: 387
Joined: Thu May 02, 2013 9:49 am
Location: Brighton, UK
Contact:

Re: Looking for a builder? Post here!

Post by CliffordMilk » Fri Jul 30, 2021 7:19 am

I’m looking for someone in the UK to debug two Buchla clones for me (258D and 281D). Most likely minor issues. Both partially working - but I’m stumped.

PM me for details of this job.

Post Reply

Return to “Music Tech DIY”