Any thoughts about Rides In The Storm

Cwejman, Doepfer, Erica, MakeNoise, Mutable instruments, TipTop Audio, Analogue Solutions, and much more! The world’s most popular format.
Be sure to look into MANUFACTURER SUB-FORA as well..
User avatar
coral garden
Learning to Wiggle
Posts: 6
Joined: Mon Feb 06, 2023 2:51 pm
Location: Berlin
Contact:

Re: Any thoughts about Rides In The Storm

Post by coral garden »

SynthBaron wrote: Sat Feb 11, 2023 12:46 pm SED_CSM_web.png

https://rides-in-the-storm.de/product/sed-csm/

Looks like there's some interesting stuff in the works if you click around on the website...
one of the final design:
SED-CSM black
its always about the loop "thinking - making - enjoying"
User avatar
coral garden
Learning to Wiggle
Posts: 6
Joined: Mon Feb 06, 2023 2:51 pm
Location: Berlin
Contact:

Re: Any thoughts about Rides In The Storm

Post by coral garden »

Maffez wrote: Fri Feb 10, 2023 4:12 am
coral garden wrote: Wed Feb 08, 2023 3:59 am thx for your little review, thx!
..SED is build with 4 discrete OTAs so the sound has elements from jupiter 4 who uses ICs for...
interesting! had the older SED filters (Dom1, etc.) down as discrete SSI2040-based - guess I was off there? what makes this closer to the jupi 4 (old juoi 4 filter with fet buffers? or the 3109-based)



SED sounds gorgeous anyways
soundwise closer to the older jup 4 one, but circuit is quite different.
its always about the loop "thinking - making - enjoying"
User avatar
SynthBaron
Super Deluxe Wiggler
Posts: 4717
Joined: Tue Jan 27, 2009 2:43 am

Re: Any thoughts about Rides In The Storm

Post by SynthBaron »

Picked up another DOC a couple weeks ago, they track together beautifully. Going to buy another shortly so I'll have 3 as my main oscillators. And whenever the BOC comes out, I'll probably replace one of my Behringer 921's with it.

https://rides-in-the-storm.de/product/boc/

Probably going to pick up some envelopes too, but not sure if I want to go with the individual modules or the big quad unit yet.
User avatar
TechForze
Wiggling with Experience
Posts: 272
Joined: Thu Feb 04, 2016 1:36 pm
Location: NL/EU

Re: Any thoughts about Rides In The Storm

Post by TechForze »

Really like the patchcables. Looking for longer ones of the same kind.
They are a little bit bigger than the Black Market ones.
For sale (EU) ModularGrid
User avatar
Maffez
Wiggling with Experience
Posts: 433
Joined: Sun Jan 14, 2018 9:06 am
Location: Austria

Re: Any thoughts about Rides In The Storm

Post by Maffez »

Hnnnnnngggg!

Image

apparently at super booth
chkk
Learning to Wiggle
Posts: 21
Joined: Mon May 01, 2023 2:49 am

Re: Any thoughts about Rides In The Storm

Post by chkk »

I have 3 small modules from them - the CON (line interface), CAM (quad active multiple) and QPM (quad passive multiple). Build quality and panels look good.

What I do not really understand is that for two modules with the same layout of jacks they don't manage to get them aligned properly ... see the picture - lines 1 to 3 align nicely, line 4 and 5 are a bit offset:
Module Alignment
Module Alignment
I cannot imagine that someone is drilling these holes manually ... just nitpicking, but I appreciate attention to small details ;)
User avatar
coral garden
Learning to Wiggle
Posts: 6
Joined: Mon Feb 06, 2023 2:51 pm
Location: Berlin
Contact:

Re: Any thoughts about Rides In The Storm

Post by coral garden »

hi, yes, there is a reason: COB and QAM is with power socket at the back in the middle and QPM is passive, the distance is for better view which is the input because a is normalized to B and C to D.
its always about the loop "thinking - making - enjoying"
Post Reply

Return to “1U & 3U Eurorack Modules”