Announcing: Synthesizers.com Manufacturer Sub-Forum

Please check out the new sub-forum by following the link above. It is nice to have another manufacturer onboard and opening another direct communication line to potential and existing customers

Doc Sketchy's new analog FREQUENCY SHIFTER!

Cwejman, Doepfer, Erica, MakeNoise, Mutable instruments, TipTop Audio, Analogue Solutions, and much more! The world’s most popular format.
Be sure to look into MANUFACTURER SUB-FORA as well..
Post Reply
User avatar
Dcramer
Super Deluxe Wiggler
Posts: 5991
Joined: Fri Mar 29, 2013 12:11 pm
Location: Canada

Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Dcramer »

:omg: :omg: :omg:

Mine is the first one in Eurorack and it's HUGE!



Rumors abound about a probable Euro freindly sized circuit board on the horizon... :foul: :foul: :foul:
User avatar
cackland
Super Deluxe Wiggler
Posts: 2653
Joined: Thu Dec 28, 2017 5:42 pm
Location: Sydney, Australia

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by cackland »

Coolio :)
User avatar
wuff_miggler
Super Deluxe Wiggler
Posts: 2279
Joined: Wed Feb 19, 2020 11:11 pm
Location: Disney, Australia

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by wuff_miggler »

awesome fart sounds DCramer :D I love the freq shifter in NI Massive.
This has a tonne more control...some of the sounds in there would be insane in a full blown electronic/bass music.
User avatar
Dr. Sketch-n-Etch
Super Deluxe Wiggler
Posts: 8658
Joined: Thu Jan 21, 2010 1:46 pm
Location: Vancouver, BC, Canada

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Dr. Sketch-n-Etch »

The latest version is certainly more eurorack-friendly than Dcramer's unit (which is 8" deep). The new version is only 3" deep, and has no wires. Here are a couple pix (for more info, head on over to the "Something New from Doc Sketchy" thread). I'm selling them for $300 US plus shipping ($30 US to USA/Canada, $50 US internationally). They will be available in about three weeks (around the end of March), because I am going to sell them with snazzy new silkscreened panels, instead of the gnarly Lazertran ones as shown in the picture, and the guy who is going to help me make them can't help me for a couple of weeks. (Incidentally, these are built like the proverbial brick shithouse, as I'm sure you will agree from the photos.)
EuroFSFront.jpeg
EuroFSRight.jpeg
We've moved fast. We need love. A part we offer is our only freedom.
Alexander Kuznetsov
Common Wiggler
Posts: 136
Joined: Tue Jul 16, 2013 12:03 am
Location: Russia

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Alexander Kuznetsov »

It would be great if it were still possible to reduce the module depth.
User avatar
Niki
Common Wiggler
Posts: 57
Joined: Sun Oct 11, 2020 11:41 pm

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Niki »

audio damage adm04 has been around for much longer. maybe it's not analog.
User avatar
drowld
Super Deluxe Wiggler
Posts: 1540
Joined: Sun Dec 08, 2013 12:53 pm

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by drowld »

Alexander Kuznetsov wrote: Sat Apr 03, 2021 4:52 am It would be great if it were still possible to reduce the module depth.
Yes sadly I have no case that are that deep. I would love this module. It seems like it would be hard to make it less deep. Maybe having it wider ?
Maybe we need to make a case just for it because I rly love the sound haha
User avatar
Dcramer
Super Deluxe Wiggler
Posts: 5991
Joined: Fri Mar 29, 2013 12:11 pm
Location: Canada

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Dcramer »

You’ve gotta stay committed! :slapfight:


Mine’s so deep it goes thru a hole in the bathroom wall! :lol:
User avatar
geremyf
Super Deluxe Wiggler
Posts: 1362
Joined: Thu Mar 26, 2015 2:01 pm
Location: Boston

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by geremyf »

Hmmm, I happen to love Dr. Sketch-n-Etch's other designs but I'm not sure I have a deep enough case either! Is the 3" depth with power connector or is that in addition?
User avatar
TemplarK
Super Deluxe Wiggler
Posts: 1493
Joined: Tue Mar 08, 2016 4:31 pm
Location: Outer Space

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by TemplarK »

Wow will these fit in a standard Doepfer case?
A sun larger than the orbit of Jupiter does indeed exist I'm looking at it right now!
User avatar
pekbro
Veteran Wiggler
Posts: 728
Joined: Sat Mar 23, 2019 6:16 am
Location: Maui

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by pekbro »

It will fit in one of my cases, no problem. How can I get one :D
User avatar
Yes Powder
Powder that makes you say "Yes"
Posts: 2584
Joined: Thu Sep 03, 2015 2:23 am
Location: Albany, New York
Contact:

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Yes Powder »

Wow, I’ve been wanting a frequency shifter! Count me in! I’m assuming that’ll fit in a Doepfer case, as I have modules with perpendicular boards that I’m pretty sure go deeper.
Everyone wants to be analog until it's time to do some analog shit.
User avatar
x2mirko
Ultra Wiggler
Posts: 844
Joined: Thu Nov 11, 2010 1:09 pm
Location: Aachen, Germany

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by x2mirko »

8" even beats Hinton modules. I thought that was impossible :D

But I think 3" is easy enough to fit unless you only have skiffs. Doepfer cases definitely have enough room. They have ~10-11 cm depth that's usable for modules, which is a little more than 4".

Very excited about this module by the way. Definitely would love to buy one :)
User avatar
Dcramer
Super Deluxe Wiggler
Posts: 5991
Joined: Fri Mar 29, 2013 12:11 pm
Location: Canada

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Dcramer »

My ‘test build’ is actually quite roomy behind the pots and jacks and wired on ‘old school’ style. :youkids:

If I ever need to cram it into a smaller case I might be able reorient the boards so that they fit behind other much shallower modules.

Of course it’d be a bitch to get them out, but I never sell anything! 👍
Last edited by Dcramer on Sat Apr 03, 2021 11:23 am, edited 1 time in total.
flashheart
Super Deluxe Wiggler
Posts: 2091
Joined: Mon Jun 01, 2009 7:58 am

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by flashheart »

Niki wrote: Sat Apr 03, 2021 5:17 am audio damage adm04 has been around for much longer. maybe it's not analog.
No, it's not (nor has it been available for several years). Only other analogue frequency I know of is the Analogue Systems Bode Freq. Shifter.
I'm not buying a maths though, not my idea of fun...
User avatar
drowld
Super Deluxe Wiggler
Posts: 1540
Joined: Sun Dec 08, 2013 12:53 pm

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by drowld »

x2mirko wrote: Sat Apr 03, 2021 9:38 am 8" even beats Hinton modules. I thought that was impossible :D

But I think 3" is easy enough to fit unless you only have skiffs. Doepfer cases definitely have enough room. They have ~10-11 cm depth that's usable for modules, which is a little more than 4".

Very excited about this module by the way. Definitely would love to buy one :)
It doesnt fit make noise or intellijel cases tho
adaris
Veteran Wiggler
Posts: 699
Joined: Mon Dec 03, 2018 12:49 pm
Location: Maryland

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by adaris »

I'm very interested in this as well, hoping for a black panel version, if anyone else would prefer black panels please let Doc know!
User avatar
Dcramer
Super Deluxe Wiggler
Posts: 5991
Joined: Fri Mar 29, 2013 12:11 pm
Location: Canada

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Dcramer »

flashheart wrote: Sat Apr 03, 2021 10:58 am
Niki wrote: Sat Apr 03, 2021 5:17 am audio damage adm04 has been around for much longer. maybe it's not analog.
No, it's not (nor has it been available for several years). Only other analogue frequency I know of is the Analogue Systems Bode Freq. Shifter.
I actually have one of the old, original Doepfer Frequency Shifters and it also has tons of stuff behind the panel.
Mines pretty old and fragile, tends to bleed a bit (I’ve trimmed it as per the manual) and can’t go down into phasing territory with its internal oscillator. (There’s a complex mod that lets you patch in Quadrature LFOs)

The cool thing about the Doepfer is that if you get the CV input pot just right (about 2:00 o’clock on mine) the internal OSC will track 1v/Oct letting you do the ‘tracked modulator’ patch that I show in the Vid. That’s what first attracted me to the Sketchy version; It’s a snap to do, just pop in two different audio oscillators, both tracking the same CV (or two different Seq channels tuned to your liking!) and wiggle away.
I’ve spent tons of time doing little experiments with the Freq, creating all sorts of oddball timbres, “fine ham abounds” :hail:

Given that my Doepfer is very old and creaky it didn’t seem fair to do a comparison with the beefy youthful Freq Shift and it’s ‘bespoke hand selected Dome Filter parts’ and glassy clean output, still made gooey-squishy by being hand soldered by cranky Doc in a shed outback :mad:
(Mine even came with a printout, detailing the efficiency of my specific Dome Filterage, it’s so hipster I’m now sporting a ‘man bun’ :ponytail: )
kwaidan
Super Deluxe Wiggler
Posts: 2220
Joined: Sat May 12, 2012 3:14 pm

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by kwaidan »

The Tokyo Tape Music Center makes a clone of the Buchla 100 Model 185 Frequency Shifter, but it is nearly twice the price and not as feature-laden.
User avatar
Dr. Sketch-n-Etch
Super Deluxe Wiggler
Posts: 8658
Joined: Thu Jan 21, 2010 1:46 pm
Location: Vancouver, BC, Canada

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Dr. Sketch-n-Etch »

Hey Frequency Shifter enthusiasts,

Here's the deal: I can't make this unit with any less PCB real estate than I'm using now. If I made this module 4" wide (20HP) then I could do it all on two PCBs, and it would get about 1" less deep. However, that's a lot of panel space for 4 pots, 1 switch and 8 jacks.

I'm going to look for some smaller sockets with long leads (that can be used to plug in on the board below) -- the ones I'm using are fairly long. However, even if I can find something that's 0.1 or 0.2" shorter, that will only save about 0.6" of thickness, getting it down to 2.5" or so, which is probably still too thick for many.

EDIT: It looks like Tayda have the thing I'm looking for (which I couldn't find on Digikey, although there were hundreds of options, all of them bad). I have to do a huge Tayda order, so I'll order a few hundred new connectors and see how much depth I can eliminate.

Just for shits and giggles, though, could one of you actually measure your case and tell me how deep this thing can be to fit? I see that the Intellijel Palette Case is only 45mm deep, so there's no way that my module would ever fit in that.

Actually, looking at Tayda, I see that the sockets come in right-angle versions. Hence, with a bit of engineering, I could make it so that the Translator board slides sideways onto the panel board pins, and that would eliminate a good 1/2" right there. Then, with shorter stackable headers on the other boards, I could take an inch off the thickness. I'll order some of those and see what I can do.
We've moved fast. We need love. A part we offer is our only freedom.
kwaidan
Super Deluxe Wiggler
Posts: 2220
Joined: Sat May 12, 2012 3:14 pm

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by kwaidan »

Make Noise 104 HP: 2.56” module depth.
Moog cases: 1.9” module depth.
LunaticSound
Ultra Wiggler
Posts: 924
Joined: Tue Dec 25, 2018 3:50 pm
Location: Hamburg

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by LunaticSound »

Mantis would be 2.4"
User avatar
BlinkyLights
Super Deluxe Wiggler
Posts: 2006
Joined: Wed Feb 13, 2019 12:16 am

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by BlinkyLights »

I don't mind the current depth, myself, uLFOs are almost that deep and I have two of those in this DIY case already.

Looking forward to this.
Alexander Kuznetsov
Common Wiggler
Posts: 136
Joined: Tue Jul 16, 2013 12:03 am
Location: Russia

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Alexander Kuznetsov »

My case is 75 mm deep but it cannot be considered a standard as it was made for order.
Last edited by Alexander Kuznetsov on Sat Apr 03, 2021 4:27 pm, edited 1 time in total.
Abomb1st
Common Wiggler
Posts: 64
Joined: Sat Jun 21, 2014 1:26 am
Location: Uk

Re: Doc Sketchy's new analog FREQUENCY SHIFTER!

Post by Abomb1st »

Where can I buy one? Really wanted an Cwejman fsh but that will probably and sadly never happen now. This looks great, is this similar in design to something else like the bode?
Post Reply

Return to “1U & 3U Eurorack Modules”