Voting open for your top 3 tracks in our Odd Meter Remix/ReMangle/Reimagine Challenge

Prizes generously donated by:
ADDAC System (Eurorack 3U)
Endorphin.es (Eurorack 3U)
Fred's Lab (DIY Paraphonic Synth)
Northern Light Modular (Buchla-format h-series OR Eurorack3U)
Rattly and Raw (Wiggler Approved Kontakt Instrument)
Studio.h (Buchla-format 4U)

Get your vote on and free 42 minute modular playlist for your listening pleasure.

New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Cwejman, Doepfer, Erica, MakeNoise, Mutable instruments, TipTop Audio, Analogue Solutions, and much more! The world’s most popular format.
Be sure to look into MANUFACTURER SUB-FORA as well..

Moderators: Kent, luketeaford, Joe.

Post Reply
continuum
Super Deluxe Wiggler
Posts: 2204
Joined: Sat May 26, 2012 11:59 am

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by continuum » Fri Sep 17, 2021 11:33 am

Here are the lists of programs and the manual for those interested:
MODFX

CHORUS

Vintage Random Vibrato
Dimension
Vintage Ensemble
6 Voice Chorus
Dual Vibrato
Diffuse Chorus
Random Chorus 4 Voice
Tri Stereo Chorus

FLANGER

Dual Flange/Pan
Thru Zero Flanger
Short Karplus
Dual Karplus
Interval Karplus
Chord Resonator
Haas Panner
Haas Detune

FILTER

Mono 12 Stage Phaser
Dual 4 + 8 Stage Phaser
Quad Bandpass LFO
Many 1 Pole
Tremolo Pan
Tape Filter
Formant Ping Pong Delay
Ahh Detuned

FSU

DISTORT
Tape Saturation
Bit Crusher
Clipper
Dual Rectifier
Ring Mod Sine
Dual Ring Mod
Frequency Shifter
Dual Frequency Shift

GLITCH/WARP

Glitch Pitch
Glitch Chorus
Varispeed
Varispeed Grains
Random Grain
Pitch Grain
Random Grain Fb2
Many Head Pitch Feedback

SOUND ON SOUND

Dual Head
Dual Pitch
Chorus
Varispeed
Panning Heads
Random Grains
Buffer Degrade
Frozen Plate
Attachments
Tiptop_Audio_fx_manual_MODFX_FSU.pdf
(1.73 MiB) Downloaded 18 times
Tiptop Audio R&D
www.tiptopaudio.com/

Cornerman
Common Wiggler
Posts: 95
Joined: Tue Mar 13, 2012 3:54 pm

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by Cornerman » Sat Sep 18, 2021 9:41 am

Are these new algo's from the FSU & ModFx also available in the Z-DSP ?

User avatar
Morim
Wiggling with Experience
Posts: 319
Joined: Fri Oct 23, 2020 12:01 pm

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by Morim » Sat Sep 18, 2021 11:03 am

Is there a reason why you can't clear the buffert with CV?
(Number of inputs can be one...)(for SOS on FSU)
I think it would be nice to be able to grab different parts without it becomming to muddy.
But maybe I have missed something here? :hmm:
Check out my project "P°ka YΠke" on #SoundCloud
https://soundcloud.app.goo.gl/Kszfy

User avatar
Junk Rhythm
Big Bottom Shaker
Posts: 2250
Joined: Wed Mar 11, 2009 2:16 pm
Location: Austin, TX
Contact:

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by Junk Rhythm » Sat Sep 18, 2021 11:50 am

Cornerman wrote:
Sat Sep 18, 2021 9:41 am
Are these new algo's from the FSU & ModFx also available in the Z-DSP ?
I hope so!

continuum
Super Deluxe Wiggler
Posts: 2204
Joined: Sat May 26, 2012 11:59 am

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by continuum » Sat Sep 18, 2021 12:03 pm

Cornerman wrote:
Sat Sep 18, 2021 9:41 am
Are these new algo's from the FSU & ModFx also available in the Z-DSP ?
Some of the Chorus programs overlap with the Chorus card but that is about it.
Tiptop Audio R&D
www.tiptopaudio.com/

continuum
Super Deluxe Wiggler
Posts: 2204
Joined: Sat May 26, 2012 11:59 am

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by continuum » Sat Sep 18, 2021 12:04 pm

Morim wrote:
Sat Sep 18, 2021 11:03 am
Is there a reason why you can't clear the buffert with CV?
(Number of inputs can be one...)(for SOS on FSU)
I think it would be nice to be able to grab different parts without it becomming to muddy.
But maybe I have missed something here? :hmm:
To clear the SOS buffer you hold down the SOS bank button. Any method using a knob or CV was far too error prone by the user.
Tiptop Audio R&D
www.tiptopaudio.com/

Cornerman
Common Wiggler
Posts: 95
Joined: Tue Mar 13, 2012 3:54 pm

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by Cornerman » Sat Sep 18, 2021 1:16 pm

continuum wrote:
Sat Sep 18, 2021 12:03 pm
Cornerman wrote:
Sat Sep 18, 2021 9:41 am
Are these new algo's from the FSU & ModFx also available in the Z-DSP ?
Some of the Chorus programs overlap with the Chorus card but that is about it.
Thanks for the information :) will be buying the FSU for sure Then :)

seychmar
Common Wiggler
Posts: 202
Joined: Fri Jul 30, 2010 2:46 am
Location: Belgium

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by seychmar » Sun Sep 19, 2021 3:16 am

This is a great series of modules. Pity the inputs are mono. Makes daisy chaining them impossible.

User avatar
studio460
Super Deluxe Wiggler
Posts: 1976
Joined: Wed Oct 28, 2020 10:35 pm
Location: Los Angeles, CA USA
Contact:

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by studio460 » Mon Sep 20, 2021 9:17 pm

continuum wrote:
Fri Sep 17, 2021 11:33 am
Here are the lists of programs and the manual for those interested . . .
Dang! I guess I have to get both now (was only planning on getting the FSU). As they say, you can never have too many VCAs flangers. As I said, I already have the excellent Source Audio DSP modulation-pedals, but in-rack solutions are much preferred now. When can I expect to see these at Detroit Modular?
continuum wrote:
Sat May 15, 2021 1:02 pm
ZVERB and the rest of the line (ECHOZ, Z5000) are designed to work in two ways: 1) turn a mono source like most Euro voices into stereo or 2) as a mono send from a mixer . . .
I have a ton of mono-voices, so these are perfect for me. Nicely done, continuum and Tiptop team—kudos, and thank you!
Image

continuum
Super Deluxe Wiggler
Posts: 2204
Joined: Sat May 26, 2012 11:59 am

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by continuum » Tue Sep 21, 2021 10:37 am

studio460 wrote:
Mon Sep 20, 2021 9:17 pm
Dang! I guess I have to get both now (was only planning on getting the FSU). As they say, you can never have too many VCAs flangers. As I said, I already have the excellent Source Audio DSP modulation-pedals, but in-rack solutions are much preferred now. When can I expect to see these at Detroit Modular?
They should start showing up at shops around the first of October depending on shipping conditions.
Tiptop Audio R&D
www.tiptopaudio.com/


akrenaut
Common Wiggler
Posts: 193
Joined: Thu Aug 16, 2018 9:37 pm

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by akrenaut » Sun Oct 10, 2021 9:38 pm

Is there any possibility of flashing firmware to change to another module within this complete lineup of 8hp effects? They all appear to be identical. Sure makes the dollar stretch a lot further when you can flash and change to a completely different module. Similar to what Noise Engineering did with their Versio series.

I'm sure tiptop would like to continue selling individual modules. But it's hard to guage how many additional sales may be had with the ability to flash/switch to a new module. Or how many sales may be lost to a module platform where this is possible to do. Or a platform that offers the ability to make your own set of 32 effects like the Happy Nerding FxAid.

dreamrobe
Common Wiggler
Posts: 85
Joined: Mon Nov 05, 2012 9:06 pm

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by dreamrobe » Wed Nov 24, 2021 5:53 pm

I wonder why the white versions of ModFx & FSU need 30mA less than the black versions.

User avatar
tdallas
Veteran Wiggler
Posts: 704
Joined: Thu Oct 24, 2019 5:55 am
Location: Germany

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by tdallas » Thu Nov 25, 2021 4:15 am

dreamrobe wrote:
Wed Nov 24, 2021 5:53 pm
I wonder why the white versions of ModFx & FSU need 30mA less than the black versions.
:party: It is on the first page of this thread for the first three modules -> https://modwiggler.com/forum/viewtopic. ... 8#p3154298 (Extra LEDs under the panel in the black version)

ricardopeixoto
Learning to Wiggle
Posts: 43
Joined: Wed Jan 29, 2020 10:15 am

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by ricardopeixoto » Thu Nov 25, 2021 7:35 am

akrenaut wrote:
Sun Oct 10, 2021 9:38 pm
Is there any possibility of flashing firmware to change to another module within this complete lineup of 8hp effects? They all appear to be identical. Sure makes the dollar stretch a lot further when you can flash and change to a completely different module. Similar to what Noise Engineering did with their Versio series.

I'm sure tiptop would like to continue selling individual modules. But it's hard to guage how many additional sales may be had with the ability to flash/switch to a new module. Or how many sales may be lost to a module platform where this is possible to do. Or a platform that offers the ability to make your own set of 32 effects like the Happy Nerding FxAid.
+1
This would be a great feature indeed.
I have a Z5000 that I don't use frequently and would love to try other firmware, especially the FSU.

jones
Common Wiggler
Posts: 71
Joined: Thu Sep 03, 2015 3:51 am
Location: Galway

Re: New FX modules from Tiptop Audio - ZVERB ECHOZ Z5000

Post by jones » Fri Nov 26, 2021 1:54 am

akrenaut wrote:
Sun Oct 10, 2021 9:38 pm
Is there any possibility of flashing firmware to change to another module within this complete lineup of 8hp effects? They all appear to be identical. Sure makes the dollar stretch a lot further when you can flash and change to a completely different module. Similar to what Noise Engineering did with their Versio series.

I'm sure tiptop would like to continue selling individual modules. But it's hard to guage how many additional sales may be had with the ability to flash/switch to a new module. Or how many sales may be lost to a module platform where this is possible to do. Or a platform that offers the ability to make your own set of 32 effects like the Happy Nerding FxAid.
+1 on that

Post Reply

Return to “1U & 3U Eurorack Modules”