Frac mounting rails query

Blacet, Metalbox, Synthasonic, PAiA and the rest.... a frac frenzy!

Moderators: Kent, luketeaford, Joe.

Post Reply
Common Wiggler
Posts: 131
Joined: Sun Sep 02, 2018 4:50 am
Location: Detroit

Frac mounting rails query

Post by » Wed Mar 06, 2019 9:06 am

Hello people - got a question for ya. You know those u-shaped channel rails for mounting modules in a 19" rack, that you attach flat rack ears to the ends? Does anyone know where to find these? Someone gave me a few with some taken-apart Paia enclosures, but I need some more for two four-panel cases. I guess I could try to find some of the stock material and try to drill and tap all the holes in a precise way, but was hoping to find them. I've made some of the flat rack ears out of aluminum. I asked Paia, but they only sell the complete enclosures and don't want to part them out, which is understandable. Any ideas would be appreciated, my frac setup is undergoing a real growth spurt

User avatar
JB or not JB, that is the question.
Posts: 275
Joined: Sat Jan 23, 2010 4:16 pm

Post by fracmonkey » Wed Mar 06, 2019 2:26 pm

Blacet makes these but they come in a two tier bare rak. You would need two of these to get a four tier rak.

Post Reply

Return to “Fractional Rack Modules”