Search found 264 matches

by defalut
Wed Jun 23, 2021 4:16 pm
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

Anyone with trouble with the screen? I had to de-solder the screen due to i forgot to solder four header pins conneting teensy to the DOT board - the four ones just beside the USB port. Before i had trouble getting the pot values to go full out and some pots only got half way; the xfade for example,...
by defalut
Wed Jun 23, 2021 9:30 am
Forum: Eurorack Modules
Topic: Vult Freak Filter meets the Euro Modular World
Replies: 38
Views: 4638

Re: Vult Freak Filter meets the Euro Modular World

When will the DIY kit be available again? Got a terrible G A S for it, almost making me consider buying a built unit. Anyone care to sell yours? ;)
Or trade for cash plus a megacommand?
by defalut
Sun Jun 13, 2021 6:17 am
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

.. That is weiird. The iBom is the same.. i mean tthere is only one iBom and it should be right? I use this link: http://neutron-sound.com/Dust_of_Time/iBOM/DoT_DIY_1.html is it right? Anyway, if i remove the two above that i already i have soldered, should they be replaced with 10u 1206 caps then?...
by defalut
Sun Jun 13, 2021 6:12 am
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

[.. One more question (sorry!). I really like to have it right and i wonder - the C9 and C10 seems to have some kind of directional bracket (looks like this: ] and both with the open end facing "inwards" on the board) on the silkscreen, that does not appear anywhere else. The ones i have bought tha...
by defalut
Sat Jun 12, 2021 1:58 pm
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

.. That is weiird. The iBom is the same.. i mean tthere is only one iBom and it should be right? I use this link: http://neutron-sound.com/Dust_of_Time/iBOM/DoT_DIY_1.html is it right? Anyway, if i remove the two above that i already i have soldered, should they be replaced with 10u 1206 caps then?...
by defalut
Sat Jun 12, 2021 9:43 am
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

.. That is weiird. The iBom is the same.. i mean tthere is only one iBom and it should be right? I use this link: http://neutron-sound.com/Dust_of_Time/iBOM/DoT_DIY_1.html is it right? Anyway, if i remove the two above that i already i have soldered, should they be replaced with 10u 1206 caps then?...
by defalut
Sat Jun 12, 2021 1:45 am
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

Strange, those two above the uC should 1206, not electros That is weiird. The iBom is the same.. i mean tthere is only one iBom and it should be right? I use this link: http://neutron-sound.com/Dust_of_Time/iBOM/DoT_DIY_1.html is it right? Anyway, if i remove the two above that i already i have sol...
by defalut
Fri Jun 11, 2021 2:59 pm
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

Hey, i´m still building, with the limited time i have. And i have a very basic question. In iBom the C7, C9 and C10 looks like this, and C7 is the same design on the circuit board. C9 and C10 is not, the dont have the rounded shape on the silkscreen. Ibom: C7-C9-C10.jpg I guess it doesn´t matter, it...
by defalut
Thu May 06, 2021 2:46 pm
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

Hmm, what seems to fit best is the 1cm distances screwed to the two holes closest to the border. And as stated, i will need to cut off some corner or two to make the button beside it fit. Possibly i have round distandes, donnu.. i dont have very much of that kind of material, but since it´s only two...
by defalut
Thu May 06, 2021 7:18 am
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

Hey, wondering about a build doc for the unit, is there any existing? Specifically i would like to know how to properly position the screen into the hole for it, and what distance adapters to use. I read 6mm long 2,5mm screws in nylon, some where.. is that correct? What doid you use? I have a set of...
by defalut
Tue May 04, 2021 2:43 pm
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

its supposed to be all 805. iBom needs some clean up. 0603 will be fine throughout though iBom is clean enough, no worries. Is says 0805 everywhere it should, i think. It´s just on the board itself there are a few placements that seems as if they would fit a 0603 better than a 0805. But no matter, ...
by defalut
Sun May 02, 2021 5:17 am
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

its supposed to be all 805. iBom needs some clean up. 0603 will be fine throughout though iBom is clean enough, no worries. Is says 0805 everywhere it should, i think. It´s just on the board itself there are a few placements that seems as if they would fit a 0603 better than a 0805. But no matter, ...
by defalut
Sat May 01, 2021 4:19 pm
Forum: Music Tech DIY
Topic: Neutron sound Dust of Time.
Replies: 399
Views: 28553

Re: Neutron sound Dust of Time.

Question for assembly: do I need to use 1206 resistors for R1 and R3 or can I use 0805? Those carry some current so you want the parts in the BOM or equally power rated 0805s which i guarantee you dont have on hand since they are exotic and expensive Got a similar question; i have bucketloads of 06...
by defalut
Mon Apr 19, 2021 1:45 pm
Forum: General Gear
Topic: Unofficial Machinedrum_SPS1-UW_OS_X.04 7-3-2021 UPDATED
Replies: 20
Views: 2437

Re: Unofficial Machinedrum_SPS1-UW_OS_X.04 7-3-2021 UPDATED

The X.04 is crazy good, and i really dig that they finally have released a new manual with 3.10 - they have really put down a lot of work in it! Also, the MegaComUI is interesting; a plugin software i think, that it´s "MegaCom host software for communicating with MegaCommandLive" and features File s...
by defalut
Mon Apr 19, 2021 1:38 pm
Forum: Music Tech DIY
Topic: [IC] megacommand PCB (midi controleur for elektron MD)
Replies: 18
Views: 1001

Re: [IC] megacommand PCB (midi controleur for elektron MD)

I´ve build around 50-70 of these little bastards without a problem so if anyone want´s advice or help building, i can get you sorted. Though i only sell my services as a builder, advice i give freely. PM me here or send to foo at gmx dot com. Just a warning; they are difficult to source everything t...
by defalut
Tue Jan 12, 2021 7:17 am
Forum: Music Tech DIY
Topic: Cheap endless encoder knobs inside EU?
Replies: 1
Views: 153

Re: Cheap endless encoder knobs inside EU?

Found nice ones from Farnell, but they got more expensive by 20% and were untried by me, so what the hell.. i got 50 of the thonk ones and hope customs isn´t too rough with me.
by defalut
Mon Jan 11, 2021 2:30 pm
Forum: Music Tech DIY
Topic: Cheap endless encoder knobs inside EU?
Replies: 1
Views: 153

Cheap endless encoder knobs inside EU?

Hiya, looking for black endless encoder knobs without pointer or dot, preferrably with the type d-shaft and shaft diameter 6mm, like the smallest here: https://www.thonk.co.uk/shop/sifam-soft-touch-encoder-knobs/ I will need about 20-40 pcs, and if they are, like these, soft touch it would be a good...
by defalut
Tue Dec 22, 2020 2:54 am
Forum: Expert Sleepers
Topic: USAMO for Antelope Orion?
Replies: 8
Views: 252

Re: USAMO for Antelope Orion?

Got rid of my USAMO due to getting good results in Bitwig with my iConnectivity midi interface only, weirdly enough it helped a lot. Good luck everyone, i believe it will work at least with Antelope and Ableton as seen above, but i had trouble in bitwig so gave up. But i found anouther solution.
by defalut
Thu Dec 10, 2020 8:32 am
Forum: Expert Sleepers
Topic: USAMO for Antelope Orion?
Replies: 8
Views: 252

Re: USAMO for Antelope Orion?

allgreen2.jpg
Is someone else needs support..
by defalut
Thu Dec 10, 2020 8:26 am
Forum: Expert Sleepers
Topic: USAMO for Antelope Orion?
Replies: 8
Views: 252

Re: USAMO for Antelope Orion?

YAY ALL GREEN!
by defalut
Thu Dec 10, 2020 8:20 am
Forum: Expert Sleepers
Topic: USAMO for Antelope Orion?
Replies: 8
Views: 252

Re: USAMO for Antelope Orion?

Ah okay, will do..
I´ll let you know how i proceed.. It´s better now at least..
by defalut
Thu Dec 10, 2020 7:59 am
Forum: Expert Sleepers
Topic: USAMO for Antelope Orion?
Replies: 8
Views: 252

Re: USAMO for Antelope Orion?

Ok, i have restarted and switched some cables, oddly enough the DIN1 midi channel that receives midi from usamo was trouble in ableton. But anyway, i sort of got it working i hope? Clip and activity blink in sync, and i have dropped the interval a bit to see what´s happening in the test. Also tried ...
by defalut
Thu Dec 10, 2020 6:18 am
Forum: Expert Sleepers
Topic: USAMO for Antelope Orion?
Replies: 8
Views: 252

Re: USAMO for Antelope Orion?

I tried routing any audio to it, just to feed it, but got an error about some kind of problem with the midi data. Do i have to route usamos output as a "synth" out through one of my outputs, and take that and feed into the box, correct? Antelope 32 HD´s routing capabilities are crazy so i´m not too ...
by defalut
Thu Dec 10, 2020 5:49 am
Forum: Expert Sleepers
Topic: USAMO for Antelope Orion?
Replies: 8
Views: 252

USAMO for Antelope Orion?

Hello, i have an antelope 32 HD interface, just got an USAMO which i though could help out in syncing between my machinedrum and bitwig for example. But i have trouble in getting it to work, even in the test phase. I am unsure if i get the audio part out to the box, i never get the clip to light up ...
by defalut
Tue Nov 10, 2020 5:44 pm
Forum: General Gear
Topic: Unofficial Machinedrum_SPS1-UW_OS_X.04 7-3-2021 UPDATED
Replies: 20
Views: 2437

Re: Unofficial Machinedrum SPS1-UW OS 1.70 OS

A recap; the megacommand group buy project was a great success. I´ve sold all the kits and build units to a lot of people. Thanks for all the support, you know who you are. :) Now i am shutting down the service, and will only build complete units on demand. A have a few finished units still, but wil...

Go to advanced search