Search found 2216 matches

by VortexRanger
Fri May 28, 2021 11:02 am
Forum: Eurorack Modules
Topic: E350 problem with phase modes and strange behaviours
Replies: 5
Views: 174

Re: E350 problem with phase modes and strange behaviours

donpuzo wrote:
Fri May 28, 2021 9:53 am
haha sorry I meant "sweep", but I was quite tired from all the day wiggling : )

I'm going to check that, thank you very much!
Ah that definitely clears it up :razz:
by VortexRanger
Fri May 28, 2021 9:43 am
Forum: Eurorack Modules
Topic: E350 problem with phase modes and strange behaviours
Replies: 5
Views: 174

Re: E350 problem with phase modes and strange behaviours

Thank you Vortex, I used the Phase Mode specially on the Z out, so I don't have too many memories of that mode on the XY OUT! Now I know! I still feel some strange behaviours on Z OUT on Bank C; is there a way to check every "swip" of the morphs in each bank/mode? Thank you! Aside from knowing that...
by VortexRanger
Thu May 27, 2021 2:55 pm
Forum: Eurorack Modules
Topic: E350 problem with phase modes and strange behaviours
Replies: 5
Views: 174

Re: E350 problem with phase modes and strange behaviours

That's normal. When it's in "phase mode" the Y control is (bipolar) amplitude control. You can modulate it with a VCO for basically a ring mod.
by VortexRanger
Wed Mar 10, 2021 2:43 pm
Forum: General Gear
Topic: Announcing Strega!
Replies: 350
Views: 23803

Re: Announcing Strega!

Pyrrhix wrote:
Wed Mar 10, 2021 1:45 pm
Quick question that I couldn't find an answer to in the manual: Is it alright to use a mono TS cable with the line-level TRS output?
Yes, that's fine.
by VortexRanger
Tue Mar 09, 2021 2:34 pm
Forum: General Gear
Topic: Announcing Strega!
Replies: 350
Views: 23803

Re: Announcing Strega!

by VortexRanger
Fri Mar 05, 2021 9:44 am
Forum: Eurorack Modules
Topic: Toppobrillo Sport Modulator 2- discussion and signup
Replies: 447
Views: 25512

Re: Possible return of the Sport Modulator??

DaShmoop wrote:
Fri Mar 05, 2021 12:07 am
While we're on the topic of ergonomics I'd like to suggest a layout where all jacks are on the bottom (or top) of the module and all knobs and mini pots opposite.
Good god no
by VortexRanger
Wed Feb 24, 2021 11:45 am
Forum: General Gear
Topic: Announcing Strega!
Replies: 350
Views: 23803

Re: Announcing Strega!

"Let's explore some of the relationships between the various circuits in Strega."

by VortexRanger
Thu Jan 28, 2021 12:26 pm
Forum: General Gear
Topic: Make Noise: Strega Mega-Thread (all merged here)
Replies: 292
Views: 19238

Re: Something new from Make Noise: Strega

Livestream on Instagram with @sarahbellereid playing Strega after the YouTube video apparently. I look forward to hearing more people prove "Strega makes everyone sound like Cortini" wrong :) Hey everybody it is actually a video post that Sarah will be doing on her Instagram channel. I misspoke the...
by VortexRanger
Thu Jan 28, 2021 11:02 am
Forum: General Gear
Topic: Make Noise: Strega Mega-Thread (all merged here)
Replies: 292
Views: 19238

Re: Something new from Make Noise: Strega

in case this link got lost upstream..

video launches in about an hour. hope you can come hang and chat!

by VortexRanger
Tue Aug 11, 2020 10:26 am
Forum: Eurorack Modules
Topic: Patching DJ Scratch sounds?
Replies: 71
Views: 2615

Re: Patching DJ Scratch sounds?

EATyourGUITAR wrote:
Mon Aug 10, 2020 10:51 pm
traditionally it was a sample of "aaahhhh" then that was sampled
@3:37
by VortexRanger
Thu Jan 30, 2020 4:32 pm
Forum: Ciat-Lonbarde
Topic: normal sidrax behavior?
Replies: 16
Views: 1957

Re: normal sidrax behavior?

thanks - that’s reassuring. how can i adjust the bars? also - the middle bar in particular seems to do that call and response tone everytime i press it. like - press down and hold -> tone sounds then a short lull then the same tone. i seem to not be able to achieve a sustained note without the two ...
by VortexRanger
Mon Jan 13, 2020 9:38 am
Forum: Ciat-Lonbarde
Topic: Sidrax "getting started manual"
Replies: 3
Views: 2494

Re: Sidrax "getting started manual"

eyeiaye wrote:
Fri Jan 10, 2020 11:45 am
Anybody have one of these for Sidrax yet?
There's not really much of a functional difference between Sidrax and Tetrax. The Tetrax's global frequency inputs/knobs each affect only rise or fall, instead of both. The color coding of the jacks is identical.
by VortexRanger
Fri Jan 03, 2020 11:24 am
Forum: Ciat-Lonbarde
Topic: Deerhorn knob below white jacks
Replies: 1
Views: 726

Re: Deerhorn knob below white jacks

I overlooked this on the Deerhorn page:

You must always tune the response first, so that the two leds cross each other at a comfortable range from the antenna. Fine tuning is done with the top knob.
by VortexRanger
Fri Jan 03, 2020 10:00 am
Forum: Ciat-Lonbarde
Topic: Deerhorn knob below white jacks
Replies: 1
Views: 726

Deerhorn knob below white jacks

What does the knob below the two white jacks do? It seems to have some effect on the "decay" of the upper Deerhorn for me, but maybe that is a false reading since my hand is typically activating that one while I tweak the knob. Thanks!
by VortexRanger
Mon Oct 21, 2019 2:57 pm
Forum: Eurorack Modules
Topic: Beyond v/oct Pitch CV, what else needs Buffered Mults?
Replies: 24
Views: 1772

The description on the website says Within the Make Noise system the Multiple may also be used for combining clock, gate and pulse signals together to create interesting timing sources (in other words, it acts as a Gate combiner aka logic OR circuit)." Perhaps this should say Clock, gate, and pulse...
by VortexRanger
Mon Oct 21, 2019 1:39 pm
Forum: Eurorack Modules
Topic: Beyond v/oct Pitch CV, what else needs Buffered Mults?
Replies: 24
Views: 1772

My opinion on this is that Make Noise and Verbos are being irresponsible in marketing them that way (MN more so than Verbos) because the OR functionality is not a property of their mults but of their other modules. Hey there, can you point to where it is that you saw MN "marketing" gate-combining v...
by VortexRanger
Thu Oct 03, 2019 10:04 am
Forum: Eurorack Modules
Topic: stttt...tttu...tuuuuuuttterrr... stuttering vocal effects
Replies: 19
Views: 1483

Ras Thavas wrote:Perfect timing to ask this question, Make Noise just dropped this video on stuttering effect w/ the Mimeophon-

Here is the embed:

[video][/video]
by VortexRanger
Mon Sep 30, 2019 1:13 pm
Forum: Eurorack Modules
Topic: using all channels of Rene 2 effectively
Replies: 11
Views: 1411

I like to think of the X and Y Snake channels as derived from the clocks of the Cartesian channel, rather than the other way around. I always start with the C channel, and once I have something I like going on there, the other ones fall into place around it.

W
by VortexRanger
Fri Sep 20, 2019 2:01 pm
Forum: Eurorack Modules
Topic: MakeNoise Mimeophon
Replies: 1086
Views: 124178

building off of funk's questions, which CV inputs do NOT accept negative voltages? I'm confused that Rate, Zone, and Color have attenuverters but their CV inputs are described as accepting 0-5VDC. and I would be surprised if any CV inputs clamped negative voltages on a new Make Noise design. Those ...
by VortexRanger
Thu Aug 08, 2019 11:30 am
Forum: Eurorack Modules
Topic: Stereo Switching/Signal Distribution?
Replies: 11
Views: 908

Well then currently you'll struggle with moving forward if separate cables is a killer. As all modules that accept stereo inputs, are separate mono jacks. Until the big boys who kind of 'standardize' a TRS stereo jack input into their modules, it won't fly. Kind of like apple and their usb-c connec...
by VortexRanger
Tue Jul 30, 2019 1:30 pm
Forum: Eurorack Modules
Topic: Top Ten Terms to Learn Before Jumping into Eurorack
Replies: 119
Views: 6851

Accurate definitions or no, it's stupid to tell people they need to learn a bunch of vocab before they get to patch a synth.
by VortexRanger
Tue May 21, 2019 8:36 am
Forum: Eurorack Modules
Topic: Introducing X-Pan!
Replies: 121
Views: 12685

The Pan circuits are linear, or close to it. We extensively tried a number of configurations and this one sounded by far the best and most dramatic when modulated, which is the main reason for voltage controlled panning. As mdoudoroff notes this is likely better for use with CV as well.

- W
by VortexRanger
Thu May 09, 2019 6:32 pm
Forum: Eurorack Modules
Topic: MakeNoise Mimeophon
Replies: 1086
Views: 124178

yeah "it is a stereo multi-zone color audio repeater" is really a galaxy-brain way of avoiding "it's an delay module" Yeah, that's Make Noise for you. :hihi: I was waiting to see if Walker managed to get through the whole thing without saying "delay" at all. He didn't quite. :mrgreen: Guess I owe T...

Go to advanced search